Empire Comfort Systems KENSINGTON LKF-2 Installation Instructions And Owner's Manual

LKF-2 LOGS SHOWN ON BF(L,M,R)30
INSTALLER:
Leave this manual with the appliance.
CONSUMER:
Retain this manual for future reference.
WARNING
FIRE OR EXPLOSION HAZARD
If the information in this manual is not
followed exactly, a fire or explosion may
result causing property damage, personal
injury or loss of life.
— Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
— WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do
not use any phone in your building.
• Leave the building immediately.
• Immediately call your gas supplier
from a neighbor's phone. Follow the
gas supplier's instructions.
• If you cannot reach your gas supplier,
call the fire department.
— Installation and service must be
performed by a qualified installer,
service agency or the gas supplier.
INSTALLATION INSTRUCTIONS
AND OWNER'S MANUAL
KENSINGTON FOREST
VENTED DECORATIVE
GAS LOG SET
MODEL
LKF-2
FOR USE ON BURNER MODELS:
BF(L,M,R)(2124,30)(MTN,RN)-1
CONGRATULATIONS on the purchase of your
new DECORATIVE VENTED GAS LOG SET!
Your Decorative Gas Log Set is designed
and intended for installation in an approved,
existing, fully vented, wood-burning fireplace,
with a gas hook-up.
The log placement shown in this manual
replicates the set-up shown in the brochure
and provides a great flame pattern.
IMPORTANT! Read these instructions
carefully before installing or operating this
gas appliance. These instructions should be
left with the homeowner for future reference.
WARNING
If not installed, operated and maintained
in accordance with the manufacturer's
instructions, this product could expose you
to substances in fuel or from fuel combustion
which can cause death or serious illness.
WARNING
This log set is to be installed only in a sol-
id-fuel burning fireplace with a working flue
constructed of non-combustible material.
The vent damper must also have a damper
clamp attached to it to keep the damper from
accidentally closing during operation.
Page 1