How To Use; Installation Steps - HOME DECÓ 52560 Manual

Personal security
• Do not insert any object into the fan grill, as this may cause a
electric shock, personal injury or damage to the appliance.
• Do not obstruct or tamper with the appliance in any way while it is in use.
functioning.

2. HOW TO USE

PARTS AND NUMBER OF PARTS (see diagram on page 2)
1. Mounting bracket (x1)
2. Expansion screw (x2)
3. Downrod (x1)
4. Canopy (x1)
5. Joint cover (x1)
6. Body (includes motor) (x1)
7. Fan blade supporter (x6)
8. Fan blade (x6)
9. Glass shade (x1)

INSTALLATION STEPS

• Before installing the fan, make sure that the appliance is disconnected from the
electrical current.
• The ceiling where you place the fan must support a weight of at least 40 Kg.
1. Drill the 2 expansion screws (2) in the ceiling to hold the mounting bracket, then
tighten the screws with an open-end wrench. Please note: if your ceiling is made of
solid wood, you need to use self-tapping screws, the installation is the same as above.
2. As shown in the diagram, place the canopy (4) on the downrod (3) and assemble
the joint cover (5) on it. Install the downrod to the main body part containing the
electric motor (6) and assemble the iron pin at the location indicated by the arrow.
3. Place the assembled set of parts (downrod, canopy, joint cover and main body) on
the mounting bracket (1). The downrod needs to be stuck by the black round part
with holes. Keep the motor flat, then connect the wires. Cover the canopy and secure
by turning clockwise using a screwdriver.
4. Connect the wires: The ceiling fan has a switch that includes 3 wires. The black and