Power Acoustik PML-43HB Owner's Manual page 2

Av center
Table of Contents

Advertisement

INTRODUCTION
Safety Warnning and Considerations
• Clean only with a dry cloth or other similar materials.
• Install your product in a dry location that does not interfere with your vehicle's equipment.
• Do not block any ventilation openings when installing this product.
• Do not mount in the engine conpartment of your vehicle or any hot surfaces.
• Securely mount the product so that is does not come loose in the event of a collision or as a ruslt of
repeated vibrations that might occur during regular operation.
• Installation of the apparatus must be done with great care to prevent damage to your vehicle's fuel lines,
power, and electrical wiring, hydraulic brake lines, and other systems. If possible, always vist your nearest
Power Acoustik dealer to perform the installation.
• Do not run any wireing outsied or underneath the vehicle. Keep all wires inside the car.
• Take the necessary precautions when making connections to the vehicle's batter to avoid any potential
shock.
• Protect all system wires from sharp edges by carefully routing them, always use rubber grommets to
protect wiring and cables whenever installing them through metal opening.
• Secure all wiring using cable ties or wire clamps to protect them from moving parts and sharp edges.
Refer all servicing to quali ed service professionals. Service is required when the head unit has been
damaged. Such as the power input terminals are damaged, liquid has been spilled, or objects have fallen
into the apparatus, the aparatus has been exposed to rain or moisture, does not operate normally, or has
beed dropped.
• Fused shall be replaced only with the correct type and fuse value, and only when the apparatus is
powered o .
• Exposure to high sound pressure levels may lead to permanent hearing loss. Takce every precaution to
protect your hearing.
• This product is designed speci cally for use with 12V negative-ground systems only. Using this product
in systems with positive ground and / or voltages other than 12V may damage the product and your
system.

Advertisement

Table of Contents
loading

Table of Contents