Led Status Indicators; Display; Extending The Life Of The Tft Display Device; Adjusting The Display Brightness - ViewSonic V1100 User Manual

LED Status Indicators

The LED Status Indicators on the top of the V1100 display the operating status
of your V1100. The V1100 LED status indicators include:
The Power Indicator LED
• Green Light - indicates that the unit is ON.
• Light Off - indicates that the unit is OFF.
The Hard Drive (HDD) Access LED
• Flashing Green - indicates that the hard drive is being accessed.
The Battery Charge Indicator LED
• Red - indicates that the V1100 is charging.
• Off - indicates that the battery is charged.

Display

Your V1100 uses a high performance 10.4-inch active matrix TFT panel that
will display millions of colors at 1024 x 768 resolution.
Caution: Do not place heavy objects on the LCD panel. Doing so may damage
the display

Extending the Life of the TFT Display Device

Observe the following guidelines to maximize the life of the display.
1
Set the Brightness to the lowest comfortable setting.
2
When working at your desk, connect your V1100 to an external monitor and
disable the internal display.
3
If you are using AC power and have no external monitor attached, change to
Suspend Mode when not in use.

Adjusting the Display Brightness

To adjust the brightness of the display click Start > Control Panel - switch to
Classic View shown in the next section of this user guide > click Tablet & Pen
Settings > Display. Move the slider bar located under Screen Brightness.
ViewSonic Tablet PC V1100 12