Monster ARYOND A32 Update Manual page 4

EN
4. After the software has been copied, the USB Flash drive should be inserted into
the USB port on the back of the monitor.
5. Enter the menu by pressing the joystick button (in the center) on the back of the
device. Then select "System Settings > USB Update > Confirm" and start the update
process. The update process will start immediately after selecting the Confirm
option, when the installation is complete, the USB Flash drive must be removed
from the back of the device.
Once all steps have been completed successfully, the software version
pre-installed on the device will be upgraded to a newer version.
04