Connection Of A Monaural Music Source; Connection Of The Optional Additional Input And Output Contact Module If-Pct (10 Input Contacts And 4 Output Contacts); Input Contacts 1 To 10 - Optimus IF-8P4ETH/0 Installation And Operating Instructions Manual

Optimax 2 system ip audio interface with 4 slots for modular amplifiers of the mp-wd1 and mp-wdc series
Table of Contents

Advertisement

IP audio interface
IF-8P4ETH/0
for 4 amplifier modules
4ETH
6.9.2.

Connection of a monaural music source

Figure 32
MODULE IF-PIA4
MUSICAL SOURCE
6.10. Connection of the optional additional input and output contact module IF-PCT (10 input
contacts and 4 output contacts).
Figure 33
The IF-PCT add-on module must be placed in
expansion slot 1 of the IF-8P4ETH/0.
IF-PCT Module
Figure 34

6.10.1. Input contacts 1 to 10

CONNECTION OF UNATTENDED
UNATTENDED INPUT
The optional IF-PCT module has 10 input contacts.
Functionality and idle status (NC/NO) are
configured through the PA Manager software.
If desired, the system can monitor these contacts
(short circuit or open line detection).
The detection time of the activation pulse of the
input contacts is configurable through the PA
Manager software (0-50-100-200-300-400-500-
1000-1500-2000 milliseconds).
For connection follow figure 34. If you want to
monitor the contact, follow figure 35.
Figure 35
INPUT CONTACT CONNECTION
WITH MONITORING
R + D Department
25
IF-8P4ETH version 6.0.001 ENG

Advertisement

Table of Contents
loading

Table of Contents