Options Settings - Sony RDR-GX7 Operating Instructions Manual

Options Settings

The Options Setup allows you to set up other operational
settings.
Select "Options" in the Setup Display. To use the display, see
"Using the Setup Displays" (page 91).
The default settings are underlined.
SETUP
Settings Format Disc : Selectable
Video Dimmer : Bright
Audio Auto Display : On
Features Command Mode : DVD3
Options Factory Setup
Easy Setup
Format Disc (DVD-RW only)
Selects the recording format when formatting a DVD-RW.
VR
Automatically formats the disc in VR
mode.
Video Automatically formats the disc in
Video mode.
Selectable Allows you to select the format before
formatting.
Dimmer
Adjusts the lighting of the front panel display.
Bright
Bright lighting.
Dark Low lighting.
Display Off Turns off the lighting.
Auto Display
On
Automatically displays information on the
screen when the recorder is turned on, etc.
Off Displays information only when DISPLAY is
pressed.
Command Mode
Changes the Command Mode of the recorder if other DVD
equipment is assigned the same Command Mode. Be sure to
match the Command Mode switch on the remote to the setting
made here. For details, see "Preparing the Remote" on page 22.
DVD1
Select this if the default Command Mode
conflicts with other DVD equipment.
DVD2 Select this if the default Command Mode
conflicts with other DVD equipment.
DVD3 The default Command Mode of the recorder.
Factory Setup
Allows you to select the setup settings by group, and return them
to their default settings. Note that all of your previous settings
will be lost.
1
Follow steps 1 to 3 of "Using the Setup Displays"
(page 91) to select "Options" in the Setup Display.
2
Press M/m to select "Factory Setup," then press
, or ENTER.
The display for selecting the group of settings
appears.
3
Press M/m to select the group of settings you want
to return to default from "Settings," "Video,"
"Audio," "Features," "Options" "Parental
Control," and "All," then press , or ENTER.
The dialogue box appears.
4
Press </, to select "Start," then press ENTER.
The selected settings return to the default settings.
5
Press ENTER when "Finish" appears.
99
Options Settings