Connecting To An Av Amplifier - Sony RDR-GX7 Operating Instructions Manual

Connecting to an AV amplifier

C
(receiver) having a Dolby Surround (Pro
Logic) decoder and 3 to 6 speakers
If your AV amplifier (receiver) only has L and R audio input
jacks, use . If your amplifier (receiver) has a digital input
C-1
jack, use .
C-2
You can enjoy Dolby Surround effects only when playing Dolby
Surround audio or multi-channel audio (Dolby Digital) discs.
VHF/UHF
IN
DIGITAL OUT
PCM/DTS/DOLBY DIGITAL LINE IN LINE OUT
S VIDEO
R-AUDIO-L VIDEO R-AUDIO-L VIDEO
COAXIAL
1 1
OUT
CONTROL S IN OPTICAL 3 2
Coaxial digital cord
C-2
(not supplied)
DIGITAL OUT
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
or
to DIGITAL OUT
(COAXIAL or OPTICAL)
Optical digital cord
(not supplied)
to coaxial or optical
digital input
[Speakers]
Amplifier (receiver)
with Dolby Surround
decoder
Rear (L) Rear (R)
Center
Subwoofer
: Signal flow
Hint
z
For correct speaker location, see the operating instructions of the
connected components.
Note
When connecting 6 speakers, replace the monaural rear speaker with a
center speaker, 2 rear speakers, and a subwoofer.
DVD recorder
~
AC IN
Y
S VIDEO
P B
P
R
COMPONENT
VIDEO OUT
C-1
LINE OUT
S VIDEO
R-AUDIO-L VIDEO
1
2
to LINE OUT
(R-AUDIO-L)
1 or 2
(white)
(red)
Stereo audio
cord (not
supplied)
(red) (white)
to audio input
[Speakers]
Front (R)
Front (L)
Rear (mono)
Connecting to an AV amplifier
D
(receiver) with a digital input jack and
6 speakers
If your AV amplifier (receiver) has a Dolby Digital or DTS
decoder and a digital input jack, use this connection. Note that
the surround sound effects of this recorder cannot be used with
this connection.
VHF/UHF
IN
DIGITAL OUT
LINE IN LINE OUT
PCM/DTS/DOLBY DIGITAL
S VIDEO
R-AUDIO-L VIDEO R-AUDIO-L VIDEO
COAXIAL
1 1
OUT
CONTROL S IN OPTICAL 3 2
to DIGITAL OUT
(COAXIAL or OPTICAL)
D
DIGITAL OUT
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
or
Optical digital cord
(not supplied)
to optical digital input
[Speakers]
AV amplifier
(receiver) having a
decoder
Rear (L)
Rear (R)
Subwoofer
: Signal flow
Hint
z
For correct speaker location, see the operating instructions of the
connected components.
Note
After you have completed the connection, be sure to set "Dolby Digital"
to "Dolby Digital" and "DTS" to "On" under "Audio" in Easy Setup
(page 24). Otherwise, no sound or a loud noise will come from your
speakers.
Step 4: Connecting the Audio Cords
DVD recorder
~ AC IN
Y
S VIDEO
P B
P
R
COMPONENT
VIDEO OUT
Coaxial digital cord
(not supplied)
to coaxial digital input
[Speakers]
Center
Front (R)
Front (L)
21