How To Enter Characters - Sony RDR-GX7 Operating Instructions Manual

How to Enter Characters

You can label a title, disc, or program by entering characters.
You can enter up to 64 characters for a title/disc/program name,
but the actual number of characters displayed in the menus such
as the Title List will vary. When the display for entering
characters appears, follow the steps below.
a
Press </M/m/, to move the cursor to the
right of the screen and select "A" (upper-
case), "a" (lower-case), or "Symbol," then
press ENTER.
The characters of the selected type are displayed.
Example: Input Title Name
Input Title Name
25ch 1:00PM - 2:00PM
1 . , - 1
2 A B C 2 Back
3 D E F 3 Clear All
4 G H I 4 Space
5 J K L 5
b
Press </M/m/, to select a character you
want to enter, then press ENTER.
The selected character appears at the top of the
display.
Input Title Name
K
1 . , - 1
Back
2 A B C 2
3 D E F 3 Clear All
4 G H I 4 Space
5 J K L 5
To enter a letter with an accent mark, select an accent
followed by the letter.
Example: Select " ` " and then "a" to enter "à."
To insert a space between the characters, select
"Space."
c
Repeat steps 1 and 2 to enter all the
characters for the name.
Input Title Name
Kids
1 . , - 1
2 A B C 2 Back
3 D E F 3 Clear All
4 G H I 4 Space
5 J K L 5
34
How to Enter Characters
"A"
6 M N O 6
"a"
7 P Q R S 7
Symbol
8 T U V 8
9 W X Y Z 9
Cancel
0 0
Finish
"A"
6 M N O 6
"a"
7 P Q R S 7 Symbol
8 T U V 8
9 W X Y Z 9
0 0 Cancel
Finish
"A"
6 M N O 6
"a"
7 P Q R S 7
Symbol
8 T U V 8
9 W X Y Z 9
Cancel
0 0
Finish
To erase a character
A Press </M/m/, to move the cursor to the
input row.
B Press </, to move the cursor to the right of
the character you want to erase.
C Press </M/m/, to select "Back," then press
ENTER.
To insert a character
A Press </M/m/, to move the cursor to the
input row.
B Press </, to move the cursor to the right of
the point where you want to insert a character.
C Press </M/m/, to select the character you
want to insert, then press ENTER.
To erase all the characters
Press </M/m/, to select "Clear All," then press
ENTER.
d
Press </M/m/, to select "Finish," then
press ENTER.
To cancel the setting, select "Cancel."
To use the number buttons
You can also use the number buttons to enter characters.
1
2
In step above, press the number buttons
repeatedly to select the character you want to
enter.
Example:
Press the number 3 button once to enter "D."
Press the number 3 button three times to enter "F."
2
Select the next character, or press SET.
3
Repeat steps 1 and 2 to enter all of the characters
for the name.
4
Press </M/m/, to select "Finish," then press
ENTER.