Power Acoustik HD-14KIT Owner's Manual page 10

Installation
4. Insert and lock the male ISO head unit wire harness connector to the female socket of the included wire harness
for HD-14KIT. Then, insert and lock the male connector of the HD-14KIT wire harness into the corresponding
female socket on the back of HD-14KIT.
B
A
ISO Connector
HD-14KIT wire harness
5. If an alternative handlebar integration module other than Scosche is available, skip this step and proceed to step
6. If included, connect the Scosche handlebar integration module to the corresponding 12-pin and 14-pin
connectors on the wire harness of HD-14KIT.
Green/White (CAN+)
Purple/White (CAN-)
Green/Black (RL-)
Green(RL+)
Purple(RR+)
Purple/Black (RR-)
White/Black (FL-)
White(FL+)
Gray (FR+)
Gray/Black (FR-)
SCOSCHE
B
A
Color
A
1
Black/White SWC-GND
Gray/White
2
Green/White
3
Yellow
4
5 Blue
Orange Illumination
6
Red
7
Black
8
Fuse: Max.15 Ampere
Voltage: 12V DC; Negative Ground
10
1 3 5 7
2 4 6 8
1 3 5 7
2 4 6 8
Function Color
B
1
Purple(+)
SWC2 2 Purple/Black(-)
SWC1 3 Gray(+)
Battery +
4 Gray/Black(-)
ANT 5 White(+)
White/Black(-)
6
ACC
Green(+)
7
Ground Green/Black(-)
8
OEM wire harness
Black (Ground)
Black (Ground)
Yellow (Black)
Yellow (Black)
Function
Rear Right
Front Right
Front Left
Rear Left