Advertisement
Care and Cleaning:
Do not use abrasive cleaners with this product, as
this could damage the surface of the equipment.
For cleaning, wipe with a clean cloth soaked in
detergent solution and wring out. Depending on
the detergent manufacturer's instructions, the
solution may be heated.
Wipe all surfaces of the equipment and the cloth
should be re-immersed periodically and the
detergent changed frequently. The detergent
should bing a clean cloth immersed in clean water
and wrung out.
To disinfect, make sure that the equipmet has
been ckleaned and dried before wiping over with
a clean cloth and a compatible disinfectant. After
disinfecting, clean with clean water and dry.
When using detergent or disinfectants, please
refer to manufacturers instructions. If you are
unsure then consult your local Infection Control
Specialist for advice.
The metal frame of this equipment can be
cleaned / disinfected by moist heat at a
temperature up to 80°C for a minimum of 1
minute or autoclaved at 80°C for at least 1
minute. After cleaning or disinfecting, trat all joints
with a water dispersing agent (e.g. WD40).
The wooden table top is not suitable for
cleaning with moist heat or autoclaving.
Height Adjustment
To adjust the height of the chair to the most
comfortable position, remove the four plastic clips
that are found at the base of the legs. This will
allow the leg extensions to drop down. Slide the
leg extensions to the desired position, making
sure that all leg extensions are at the same
height.
Replace the plastic clips in the holes in the leg,
securing the leg extensions in place, ensuring
that each clip is located fully through each of the
legs.
DO NOT exceed the maximum weight limit shown
above.
Inspect at regular intervals for wear and damage.
Ives MD EU Rep. Ltd 44 Rosses Stables,
Ballymena, Co. Antrim, BT42 2SF
Integrity Mobility Solutions Ltd 74, St. Georges Road, Bolton, Greater Manchester, BL1
2DD Tel: +44 (0) 1249 760582 website: www.integritymobilitysolutions.com
LOCAL AUTHORITY AND HEALTH SERVICE
EMPLOYEES: These instructions must be left
with the table for the end user to refer to.
Manufactured in China and distributed by:
Integrity Mobility Solutions
Integrity warrants this product for a period of 12
months.
Advertisement
