Tascam SB-16D Owner's Manual page 18

CAUTION
i DO NOT REMOVE THE EXTERNAL CASES OR CABINETS TO
EXPOSE THE ELECTRONICS. NO USER SERVICEABLE PARTS
ARE INSIDE.
i IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT,
CONTACT THE STORE WHERE YOU PURCHASED THE UNIT FOR
A SERVICE REFERRAL. DO NOT USE THE PRODUCT UNTIL IT
HAS BEEN REPAIRED.
i USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
The nameplate is located on the top of the unit as shown below.
Front side
For China
"仅适用于海拔2000m以下地区安全使用"
"仅适用于非熱帯气候条件下安全使用"
"环境保护使用年限"
产品有毒有害物质或元素的名称及含量
机种: SB-16D
品名
1 CHASSIS部分
2 FRONT PANEL部分
3 螺丝部分
4 线材部分
5 PCB Assy部分
6 电源部分
7 附属品部分
8 LABEL部分
9 包装部分
○ ： 表示该有毒有害物质在该部件所有均质材料中的含有量均在 GB/T26572 标准规定的限量要求以下。
× ： 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 GB/T26572标准规定的限量要求。
（针对现在代替技术困难的电子部品及合金中的铅)
18
TASCAM SB-16D
Nameplate
有毒有害物质或元素
铅 汞
(Pb) (Hg)
○ ○
○ ○
○ ○
○ ○
× ○
× ○
× ○
○ ○
○ ○
RACK-MOUNTING THE UNIT
Use the supplied rack-mounting kit to mount the unit in a
standard 19-inch rack, as shown below.
Remove the feet of the unit before mounting.
ATTENTION
i Leave 1U of space above the unit for ventilation.
i Allow at least 10 cm (4 in) at the rear of the unit for
ventilation.
镉 六价铬
(Cd) (Cr6+)
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
多溴联苯 多溴二苯醚
(PBB) (PBDE)
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○