Installation; Pre-Installation Check; Installation Steps - Projoy Electric PEEM-S100 User Manual

Installation

Pre-installation Check

Check the Package
Although Projoy's products have surpassed stringent testing and are checked before they leave the
factory, it is uncertain that the products may suffer damage during transportation. Please check the
package for any obvious signs of damage, and if such evidence is present, do not open the package
and contact your dealer as soon as possible.
Meter * 1
Check the Installation Environment and Position
When choosing the position of installation, comply with the following conditions:
 Install the DTU near or in the home distribution box.
 Avoid electromagnetic interference that can compromise the correct operation of electronic
equipment.
 Use a mobile phone to check the Wi-Fi signal strength at the installation position. If the Wi-Fi
signal is bad, try to install the DTU in another position or move the Wi-Fi router.

Installation Steps

·Only qualified personnel should install, troubleshoot, or replace DTU and accessories.
·Before installation, check the unit to ensure the absence of any transport or handling
damages.
·Unauthorized removal of necessary protections, improper use, incorrect installation, and
operation may lead to serious safety and shock hazards or equipment damage.
·Be aware that installation of this equipment includes the risk of electric shock.
V1.0
Antenna * 1
DANGER
- 8 -
CT * 1 SN Label * 1
Talent-MG3-MS