Specifications are subject to change without notice. Every attempt has been made to make this document complete, accurate, and up-to-date. Readers are cautioned, however, that Projoy Electric reserves the right to make changes without notice and shall not be responsible for any damages, including indirect, incidental, or consequential damages, caused by reliance on the material presented, including, but not limited to, omissions, typographical errors, arithmetical errors or listing errors in the content material.
CT. If any power is exported to the power grid, DTU will send it to each microinverter and control the output of the system. This manual contains important instructions for PEEM-S100 DTU and must be read in its entirety before installing or commissioning the equipment. For safety, only qualified technicians, who have received training or have demonstrated skills can install and maintain this DTU under the guide of this document.
Users can monitor the power generation of the system by M-Cloud monitoring App. The PEEM-S100 DTU will detect the power to the public power grid. If there is an export to the public power grid, DTU will communicate with the microinverter locally and reduce the outpower of microinverters.
Talent-MG3-MS Datasheet Model PEEM-S100 AC Input Grid Type Single phase Input AC Voltage 230V Input AC Frequency 50 / 60 Hz Max. Current per phase 100A Power Consumption per phase <1W Communication Wi-Fi Type WIFI (802.11 b/g/n) Wi-Fi Frequency Range 2400MHz-2483.5MHz...
Talent-MG3-MS Installation Pre-installation Check Check the Package Although Projoy’s products have surpassed stringent testing and are checked before they leave the factory, it is uncertain that the products may suffer damage during transportation. Please check the package for any obvious signs of damage, and if such evidence is present, do not open the package and contact your dealer as soon as possible.
Page 9
Talent-MG3-MS Step 1. Install the DTU. Fix the DTU onto the rails of AC distribution box. Connect the L and N cable to port 11 and port 14. Then connect CT cable to port 4 and port 5. Step 2. Connect CT Install the CT into the L cable.
Page 10
Talent-MG3-MS Step 3. Connect the Wi-Fi antenna Connect the Wi-Fi antenna cable to the DTU. Put the antenna out of the distribution box to get a good Wi-Fi signal. Step 4. Add the DTU to M-Cloud Home Open M-Cloud Home App. Scan the SN label of DTU and add it to the device list.
Page 11
Talent-MG3-MS Step 5. Set the power limit function Click the setting button and enter the meter setting page. Switch on the export limit button . Enter the limit power and choose the microinverter that need to control. Press “Confirm” button. Then the status and relationship will be shown on the device list. V1.0 - 11 -...
Talent-MG3-MS Maintenance Guide Routine Maintenance Only authorized personnel are allowed to carry out the maintenance operations and are responsible for reporting any anomalies. Always use the personal protective equipment provided by the employer when carrying out maintenance. During normal operation, check that the environmental and logistic conditions are appropriate. Make sure that the conditions have not changed over time and that the equipment is not exposed to adverse weather conditions and has not been covered with foreign bodies.
Talent-MG3-MS Recycling and Disposal This device should not be disposed of as residential waste. A DTU that has reached the end of its life is not required to be returned to the dealer. Users must find an approved collection and recycling facility in the area.
NOT covered by this Factory Warranty. (e) In no event will Projoy Electric Co., Ltd be held responsible or liable for any personal injuries resulting from the use of the system, or for any other damages, whether direct, indirect, incidental, or consequential;...
Need help?
Do you have a question about the PEEM-S100 and is the answer not in the manual?
Questions and answers