Electrical Junction Box Mount Using Mount Plate; Power The Cw9162I-Mr - Cisco Meraki CW9162I-MR Hardware Installation Manual

4.2.1.2 Electrical Junction Box Mount Using Mount Plate

The CW9162I-MR can be mounted to a 4" square cable junction box, a 3.5 or 4" round cable
junction box, or various U.S. and European outlet boxes (mounting screws are not included).
Using appropriate mounting hardware for your specific type of junction box, attach the mount

4.2.2 Power the CW9162I-MR

If mounting to an electrical junction box, feed the Ethernet cable through the cable access hole in the
Mount Plate.
If mounting to a wall or ceiling, the Ethernet cable will feed through the cable slot on bottom of the
CW9162I-MR.
13