Vega VEGACAL 67 Operating Instructions Manual page 21

Capacitive high temperature probe for level measurement of bulk solids

Hide thumbs Also See for VEGACAL 67:

Table of Contents

VEGACAL 67 • For connection to a controller

•

If the indication does not reach 100 %, you have to set the range

selection switch on the probe one stage lower.

•

If the indication exceeds 100 % and cannot be reset, you have

to set the range selection switch of the probe to the next higher

stage. In both cases you have to repeat the adjustment.

6 Setup with a controller

Table of Contents