Fluid Recommendations - Cornelius Chiller ("CH" Series) CH 250 Operator's & Installation Manual

Cornelius chillers are designed to operate with water to provide maximum performance for temperatures of 40° F
(4.4° C) to 100° F (37.8° C).
Distilled Water
De-Ionized Water
ohms)
(1-5 Meg
De-Ionized Water
ohms)
(5+ Meg
Propylene Glycol
(Lab & Industrial Grade)
Lab & Industrial Grade Ethylene Glycol
Mineral/Hydraulic Oils
(Commercial/Automotive Antifreeze)
Acidic/Basic Solutions
(Above 8 or below 6 PH)
Mineral/Hydraulic Oils
(Viscosity > 50 Centistrokes)
For questions regarding special or other fluids contact IMI Cornelius at 800-551-4423.
To purchase Lab or Industrial Glycol contact:
IMI Cornelius, 1-800-551-4423 - Part No. 111521000, 5 Gal.
© 1999-2010, IMI Cornelius Inc.

FLUID RECOMMENDATIONS

CH Series Chiller Operator's & Installation Manual
Acceptable
Acceptable
Acceptable with Stainless Steel & PVC only (No Copper
or Brass)
Acceptable - 30% Glycol/70% Water
(For Applications with Temperatures below 40° F)
Acceptable - 30% Glycol/70% Water
(For Applications with Temperatures below 40° F)
NOT Acceptable
(Silicate Rust Inhibitors in Automotive/Commercial anti-
freeze damages pump seals and housing which lead to
failure.)
Not Acceptable
Not Acceptable
- 5 - Publication Number: 620914801