Adding Patterns Or Letters - Singer F9100 Instruction Manual

MEMORY
M
5
M
6
M
7
M
8
9

Adding patterns or letters

M
1
M
2
5
5 Press the desired pattern number. (e.g. 60)
6
6 The selected pattern displays on the LCD screen.
7
7 Repeat step 5, 6 for more patterns to be stored in the
memory.
Please Note: When the memory the full with 20 units
of patterns, the machine will beep to signal it.
9
8 Press the " " button to leave the memory mode and
return to the normal screen.
Attention: The selected pattern will be cleared from
the memory module after closing the machine if you do
not press the "
completed your selection.
1
1 While in the memory mode, press
button until the stitch number you have selected is
displayed, then add the new stitch.
2
2 Press pattern No. (e.g. 31) The selected pattern will be
inserted.
63
" button again when you have
stitch width adjustment