Table of Contents
Advertisement
BACK PANEL / RÜCKSEITE / PANNEAU ARRIÈRE / PANEL POSTERIOR / PANEL TYLNY / PANNELLO
POSTERIORE
FUSE
F2A/250V
MODE SELECTION / MODUS AUSWÄHLEN / SÉLECTION DE MODE / SELECCIÓN DEL MODO /
WYBÓR TRYBU / SELEZIONE DELLE MODALITÀ
EN
NOTE
When the projector is properly connected to the mains, the following information appears successively in the display during the startup process:
"Software Update, Please Wait..." (for service purposes only), the software version "Software V1.xx" and "WELCOME TO cameo". After this operation,
the projector is ready for use and changes back to the mode that was previously selected.
STATIC COLOUR MODE
Press the MODE button repeatedly if necessary to select the Static Colour Mode. Press the UP and DOWN buttons to select one of the 7 desired
colours. CL1 = Red, CL2 = Green, CL3 = Blue, CL4 = Yellow, CL5 = Cyan, CL6 = Purple, CL7 = White (CL0 = blackout).
COLOUR JUMPING MODE
Press the MODE button repeatedly if necessary to select the Colour Jumping Mode. Press the UP and DOWN buttons to select the colour jumping
speed from J01 - J99.
13
Advertisement
Table of Contents
