GETTING STARTED GUIDE NI PXIe-5644R 6 GHz Reconfigurable RF Vector Signal Transceiver Before you begin, install and configure your chassis and controller. Note This document explains how to install, configure, and test the NI 5644R. The NI 5644R is an RF vector signal transceiver (VST), and ships with the following software options, which you use to program the device.
Touch the antistatic package to a metal part of the computer chassis. Remove the device from the package and inspect the device for loose components or any other sign of damage. Never touch the exposed pins of connectors. Caution 2 | ni.com | NI PXIe-5644R Getting Started Guide...
A PXI Express embedded controller or PC with MXI controller system that meets the system requirements specified in this guide and chassis documentation. Optional Items • PXI Chassis Slot Blocker kit (NI part number 199198-01) • SMA (m)-to-SMA (m) cables 4 | ni.com | NI PXIe-5644R Getting Started Guide...
Page 7
Related Information Refer to the NI RF Vector Signal Analyzers Help or the NI RF Signal Generators Help for more information about using the NI-RFSA and NI-RFSG instrument driver FPGA extensions. 6 | ni.com | NI PXIe-5644R Getting Started Guide...
Remove the black plastic covers from all the captive screws on the module front panel. Identify a supported slot in the chassis. The following figure shows the symbols that indicate the slot types. 8 | ni.com | NI PXIe-5644R Getting Started Guide...
If you are using an active device, such as a preamplifier or switch routed to the NI 5644R RF IN connector, ensure that the device cannot generate signal transients greater than the RF and DC specifications of the NI 5644R RF IN connector. 10 | ni.com | NI PXIe-5644R Getting Started Guide...
Page 13
Terminal that is used when running self-calibration on the device. LO OUT Output terminal for exporting the RF IN 0 LO source. LO IN Input terminal that allows the use of an external LO for RF IN 0. 12 | ni.com | NI PXIe-5644R Getting Started Guide...
LEDs. Configuring the Hardware in MAX Use Measurement & Automation Explorer (MAX) to configure your National Instruments hardware. MAX informs other programs about which devices reside in the system and how they are configured. MAX is automatically installed with the instrument design libraries and NI-RFSA and NI-RFSG.
Windows 10 (32-bit)/8.1 (32-bit)/7 (32-bit)— Program Files\National Instruments • Windows 10 (64-bit)/8.1 (64-bit)/7 (64-bit)— Program Files (x86)\National Instruments Microsoft .NET For the location of .NET class libraries, refer to the installed NI-RFmx readme. 16 | ni.com | NI PXIe-5644R Getting Started Guide...
Page 19
Available in one of the following directories: design • Windows 10 (32-bit)/8.1 (32-bit)/7 (32-bit)— libraries Program Files\National Instruments \LabVIEW 2014\instr.lib\RF-RIO • Windows 10 (64-bit)/8.1 (64-bit)/7 (64-bit)— Program Files(x86\National Instruments\LabVIEW 2014\instr.lib \RF-RIO 18 | ni.com | NI PXIe-5644R Getting Started Guide...
Next. Specify a name and location for the project in the Create Project window and click OK. LabVIEW creates, configures, and opens a new Simple VSA and VSG project. 20 | ni.com | NI PXIe-5644R Getting Started Guide...
Page 23
Windows 7 Select Start»Control Panel»Device Manager. If you are using a PXI controller, verify that a National Instruments entry appears in the system device list. If error conditions appear in the list, right-click the NI PXIe-5644R and NI-RIO FPGA Device nodes and select Update Driver. If you are using an MXI controller, right-click PCI-to-PCI Bridge, and select Properties from the shortcut menu to verify that the bridge is enabled.
Page 25
NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt ni.com/patents file on your media, or the National Instruments Patent Notice at . You can find information about end-user license agreements (EULAs) and third-party legal notices in the readme file for your NI ni.com/legal/export-compliance...