Sony VAIO VGP-STD2 - Digitizer Stylus Manual

Sony VAIO VGP-STD2 - Digitizer Stylus Manual

Also See for VAIO VGP-STD2:

Advertisement

Sony VAIO VGP-STD2 - Digitizer Stylus Manual

Before Use

This product, Digitizer Stylus (pen), is designed for use with personal computers.

Not all features described in this manual may be available, depending on your model.

Before using this product, check your model.

Use of the pen may differ depending on the app. Refer to the manuals provided with your computer.

Names of Parts

Names of Parts

  1. Tail cap
    Do not remove the tail cap except for when replacing the battery.
  2. Buttons
    The small button can be used to display various pop-up menus. (This is similar to right-clicking a mouse.) The large button can be used to erase text depending on the app you use.

Notes

  • This pen does not have a power supply switch. Insert a battery in the pen to operate.
  • The tail cap contains a magnet. Do not bring an object easily affected by magnetic interference (such as a credit card) close to the pen. Doing so may result in loss of recorded data.

Preparations

Insert a battery

When you insert a battery, you can operate the pen.

Replace the battery when the pen begins to function incorrectly.

  1. Remove the tail cap from the barrel of the pen ().
    Insert a battery - Step 1
  2. Insert the battery into the pen with the + side toward the nib ( ).
    Insert a battery - Step 2
  3. Reattach the tail cap.

Notes

  • The pen should not be used with a commercially available rechargeable battery. Using a rechargeable battery may result in battery leakage and malfunction.
  • When the battery power becomes low, replace with a new battery promptly. Keeping a depleted battery in the pen may cause battery leakage.

Replacing the nib (tip)

The writing feeling of the supplied nib differs from the feeling of the attached nib. Replace the nib with the supplied one to change the feeling.

  1. Grasp the tip of the pen, then pull out straight ( ).
    Replacing the nib (tip)
  2. Check the direction of the new nib and insert it into the barrel of the pen.

Note
If the pen's nib is lost or broken, contact an authorized Sony service/support center.

Specifications

Buttons 2 buttons
Communication method Digital wireless transmission
Power requirements LR8D425* (SIZE AAAA) alkaline battery (1)
Battery life Approx. 18 months (alkaline battery) **
Dimensions Approx. 138.5 × 9.5 mm (5.5 × 0.4 in) (length × diameter) (not including projections)
Mass Approx. 20 g (0.7 oz) (including battery)
Operating temperature 5°C to 35°C (41°F to 95°F) (temperature gradient less than 10°C (18°F)/hour)
Operating humidity 20% to 80% (not condensed), provided that humidity is less than 65% at 29°C (84°F)
Storage temperature –20°C to +60°C (–4°F to +140°F) (temperature gradient less than 10°C (18°F)/hour)
Storage humidity 10% to 90% (not condensed), provided that humidity is less than 20% of 60°C (140°F) (hygrometer reading less than 35°C (95°F))

Supplied accessories

LR8D425 (SIZE AAAA) alkaline battery (1 or 2) ***

Pen nib (Tip) (1)

Operating Instructions (this document) (1)

* Alternatively called LR61

** This estimate is based on four hours of use per day, seven days per week. These could differ depending on the usage environment.

*** In the case of a model supplied with personal computers, an alkaline battery (1) is supplied.

Design and specifications are subject to change without notice.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Sony VAIO VGP-STD2 - Digitizer Stylus Manual

Advertisement

Need Assistance?

Do you have a question about the VAIO VGP-STD2 that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents