Subscribe to Our Youtube Channel
Related Manuals for Vmac A500250
Summary of Contents for Vmac A500250
- Page 1 ® Installation Manual for VMAC Accessory A500250 Remote Receptacle Accessory for Honda Powered Multifunction Power System GMF0001 www.vmacair.com www.vmacair.com...
-
Page 3: Table Of Contents
Installation ............11 VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com... - Page 4 Copyright © 2023 VMAC Global Technology Inc. All Rights Reserved. These materials are provided by VMAC for informational purposes only, without representation or warranty of any kind, and VMAC shall not be liable for errors or omissions with respect to the materials. The only warranties for VMAC...
-
Page 5: Safety
VMAC will not be held responsible for any liability, consequential damages, injuries, loss or damage to individuals or to equipment as a result of the failure of anyone to properly adhere to the procedures set out in this manual or standard safety practices. -
Page 6: Warranty
Warranty registration for VMAC systems can be completed online or by filling in the form at the back of each system installation manual. Warranty registration must be completed and sent to VMAC at the time the system is put into service for any subsequent warranty claim to be considered valid. - Page 7 If requested, failed parts must be returned to VMAC for evaluation. 4) Dealers may login to the VMAC website to view the "VMAC Labour Time Guide" (under “Agreements”) to see the allowable warranty labour times. 5) Warranty invoices must include the Service Ticket number, VMAC System ID#, hours on the compressor, and a detailed description of the work performed.
-
Page 8: General Information
Please contact VMAC for replacement hoses and further information. Ordering Parts To order parts, contact a VMAC dealer. The dealer will ask for the VMAC serial number, part number, description and quantity. Locate the nearest dealer online at www.vmacair.com/dealer-locator or call 1-877-912-6605. - Page 9 All fasteners must be torqued to specifications. Use manufacturers’ torque values for OEM fasteners. The torque values supplied in Table 1 are intended for VMAC supplied components, or for use as a guide in the absence of a torque value provided by an OEM.
-
Page 10: Illustrated Parts List
CONNECTOR, RING, 8AWG, #10 9500707 COVER, TERMINAL STRIP, RMT RCPT 5830054 O-RING, VITON, 1 3/16 ID X 1/16 5800147 PLUG, 1-3/8 HOLE 3501683 CABLE GLAND, 0.875-1.260”, NYLON VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com... -
Page 11: Maintenance And Repair Safety
Use only genuine VMAC parts to maintain the system. Genuine VMAC parts are designed to work with the high pressure and heat generated by the compressor. Substituting genuine VMAC parts may void the warranty and could cause equipment damage, injury, or death. -
Page 12: Mounting Requirements And Considerations
Failure to adhere to these requirements may damage the generator or impact the overall quality of the installation. • The receptacle enclosure is weather resistant. VMAC recommends mounting the enclosure in a cabinet. Ǜ If mounting the enclosure inside a cabinet is not possible, the enclosure Ǜ... -
Page 13: Installation
Reinstall the face plate (use care when pulling the cable out of the enclosure; ensure enough slack is maintained to prevent straining the wire connections). ☐ Tighten the cable gland nut. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com... - Page 14 ☐ Remove the (×4) fasteners securing the cover plate over the terminal strip. Discard the cover plate (Figure 4). Figure 4 — Terminal strip cover VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
- Page 15 Figure 5 — Terminal strip connections ☐ Using the (×4) fasteners removed earlier, install the new cover plate (Figure 6). Gland nut Figure 6 — Install cover plate VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
- Page 16 Install the supplied O-ring onto the 1 3/8 in hole plug. ☐ Install the plug into the cover plate (Figure 7). Figure 7 — Install cover plate plug VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
- Page 17 Notes VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
- Page 18 Notes VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
- Page 20 Manufactured by ® 888-241-2289 tech@vmacair.com 877-740-3202 warranty@vmacair.com www.vmacair.com kb.vmacair.com 1333 Kipp Road, Nanaimo, B.C., V9X 1R3 Canada...
Need help?
Do you have a question about the A500250 and is the answer not in the manual?
Questions and answers