Subscribe to Our Youtube Channel
Related Manuals for Vmac A700333
Summary of Contents for Vmac A700333
- Page 1 ® Installation Manual for VMAC Accessory Multifunction Power System (Honda IGX800) compressor service kit A700333 200 hour / 6 month service kit A700334 400 hour / 1 year service kit www.vmacair.com www.vmacair.com...
-
Page 3: Table Of Contents
400 Hour / 1 Year Service ......... . 15 VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com... - Page 4 Copyright © 2023 VMAC Global Technology Inc. All Rights Reserved. These materials are provided by VMAC for informational purposes only, without representation or warranty of any kind, and VMAC shall not be liable for errors or omissions with respect to the materials. The only warranties for VMAC...
-
Page 5: Safety
VMAC will not be held responsible for any liability, consequential damages, injuries, loss or damage to individuals or to equipment as a result of the failure of anyone to properly adhere to the procedures set out in this manual or standard safety practices. -
Page 6: Warranty
Warranty registration for VMAC systems can be completed online or by filling in the form at the back of each system installation manual. Warranty registration must be completed and sent to VMAC at the time the system is put into service for any subsequent warranty claim to be considered valid. - Page 7 If requested, failed parts must be returned to VMAC for evaluation. 4) Dealers may login to the VMAC website to view the "VMAC Labour Time Guide" (under “Agreements”) to see the allowable warranty labour times. 5) Warranty invoices must include the Service Ticket number, VMAC System ID#, hours on the compressor, and a detailed description of the work performed.
-
Page 8: General Information
Please contact VMAC for replacement hoses and further information. Ordering Parts To order parts, contact a VMAC dealer. The dealer will ask for the VMAC serial number, part number, description and quantity. Locate the nearest dealer online at www.vmacair.com/dealer-locator or call 1-877-912-6605. - Page 9 All fasteners must be torqued to specifications. Use manufacturers’ torque values for OEM fasteners. The torque values supplied in Table 1 are intended for VMAC supplied components, or for use as a guide in the absence of a torque value provided by an OEM.
- Page 10 Use only genuine VMAC parts to maintain the system. Genuine VMAC parts are designed to work with the high pressure and heat generated by the compressor. Substituting genuine VMAC parts may void the warranty and could cause equipment damage, injury, or death.
-
Page 11: General Service Information
Use all appropriate Personal Protective Equipment and follow all industry standard safety practices. ☐ Check the old oil for any evidence of metal filings or contamination. If any metal filings are found, flush the hoses and the AOST using the VMAC flushing kit (P/N: A700214). Push-To-Connect Fittings ☐... - Page 12 If the pulleys are not properly aligned, check all fasteners to ensure that they are properly torqued and that there are no loose or worn components. See the system specific Illustrated Parts List (IPL) for VMAC supplied part numbers. VMAC Belt Routing Figure 2 —...
-
Page 13: 200 Hour / 6 Month Service
A clean engine and generator compartment, in addition to being more efficient, makes detecting issues (i.e. oil leaks, wire or hose abrasion, etc.) easier. VMAC recommends cleaning the Gas MF as part of regular servicing. ☐... - Page 14 3/4 to 1 turn to seat the gasket. ☐ Remove the oil fill cap (Figure 5). Oil fill cap Oil sight glass Figure 5 — Fill oil VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
- Page 15 P-clips or cable ties. ☐ Inspect all hoses for signs of wear. If signs of wear are present, take appropriate action to prevent further wear. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
- Page 16 Cycle through the menus using the “►“ button; once “SERVICING” is displayed, press the “ENTER” button. ☐ Press the “ENTER” button again to log the service. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
-
Page 17: 400 Hour / 1 Year Service
A clean engine and generator compartment, in addition to being more efficient, makes detecting issues (i.e. oil leaks, wire or hose abrasion, etc.) easier. VMAC recommends cleaning the Gas MF as part of regular servicing. ☐... - Page 18 3/4 to 1 turn to seat the gasket. ☐ Remove the oil fill cap (Figure 9). Oil fill cap Oil sight glass Figure 9 — Fill oil VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
- Page 19 Clean any loose debris from around the air filter housing to prevent contaminants from entering the system. ☐ Remove the air filter cover and the filter element. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
- Page 20 Once the system has sat for 5 minutes, check the oil level in the sight glass and add oil as necessary. ☐ Verify there are no oil leaks. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
- Page 21 Cycle through the menus using the “►“ button; once “SERVICING” is displayed, press the “ENTER” button. ☐ Press the “ENTER” button again to log the service. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
- Page 22 Notes VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
- Page 24 Manufactured by ® 888-241-2289 tech@vmacair.com 877-740-3202 warranty@vmacair.com www.vmacair.com kb.vmacair.com 1333 Kipp Road, Nanaimo, B.C., V9X 1R3 Canada...
Need help?
Do you have a question about the A700333 and is the answer not in the manual?
Questions and answers