1. Manuals
  2. Brands
  3. Vmac Manuals
  4. Power Supply
  5. GMF0001
  6. Installation and owner's manual

Vmac GMF0001 Installation And Owner's Manual

Multifunction power system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
®
Installation and Owner's Manual
Multifunction Power System
(Honda Powered)
GMF0001
www.vmacair.com
www.vmacair.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GMF0001 and is the answer not in the manual?

Questions and answers

Related Manuals for Vmac GMF0001

Summary of Contents for Vmac GMF0001

  • Page 1 ® Installation and Owner’s Manual Multifunction Power System (Honda Powered) GMF0001 www.vmacair.com www.vmacair.com...

  • Page 3: Table Of Contents

    Accessory Products from VMAC ........85...
  • Page 4 Copyright © 2023 VMAC Global Technology Inc. All Rights Reserved. These materials are provided by VMAC for informational purposes only, without representation or warranty of any kind, and VMAC shall not be liable for errors or omissions with respect to the materials. The only warranties for VMAC...

  • Page 5: Safety

    VMAC will not be held responsible for any liability, consequential damages, injuries, loss or damage to individuals or to equipment as a result of the failure of anyone to properly adhere to the procedures set out in this manual or standard safety practices.

  • Page 6: Safety Precautions

    Proper service and repair are important to the safety of the service technician and the safe, reliable operation of the equipment. Always use genuine VMAC replacement parts. The procedures described in this manual are the only authorized methods of installation, service and repair.
  • Page 7 • Accumulated oil and grease can cause the system to overheat and pose a fire hazard. Keep the system clean and repair any leaks immediately. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 8 Do not service the generator unless qualified to do so. • Do not operate the Gas MF unless this manual has been read in its entirety. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 9 Components and hoses under pressure could fail and cause serious injury or death. • Loose fasteners or components can damage equipment, ensure all fasteners and components are properly torqued or secured. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...

  • Page 10: Warranty

    (ii) services are completed in accordance with the Owner’s Manual; (iii) proof of purchase of applicable service kits are made available to VMAC upon request. The VMAC Lifetime Warranty is applicable to new products shipped on or after 1 October, 2015. Warranty Registration The VMAC warranty registration form is located near the back of this manual.
  • Page 11 VMAC will provide direction for repair or replacement of the failed components. If requested, failed parts must be returned to VMAC for evaluation. 4) Dealers may login to the VMAC website to view the "VMAC Labour Time Guide" (under “Agreements”) to see the allowable warranty labour times.

  • Page 12: General Information

    Please contact VMAC for replacement hoses and further information. Ordering Parts To order parts, contact a VMAC dealer. The dealer will ask for the VMAC System ID (see page 27), part number, description and quantity. Locate the nearest dealer online at www.vmacair.com/dealer-locator or call 1-877-912-6605.

  • Page 13: Multifunction Power System (Honda) Installation Manual

    ® Multifunction Power System (Honda) Installation Manual...

  • Page 15: Installation Requirements And Considerations

    Will the unit be mounted where it will be exposed to high contamination levels, including combustible gases? • Will the unit be used in temperatures below -5 °C (23 °F)? If so, VMAC recommends ordering the system with the optional Cold Climate Kit. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...

  • Page 16: Mounting Locations And Ventilation Requirements

    Not recommended Figure 1 — Mounting locations VMAC does not recommend mounting the unit at the back of the vehicle as the drag created when the vehicle is moving causes debris to be deposited (and accumulated) inside the unit.

  • Page 17: Ventilation Requirements

    If mounted in an enclosure, or the bed of a pickup truck box, the exhaust must be vented outside of the vehicle to prevent the engine from ingesting its exhaust and overheating or stalling. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...

  • Page 18: Mounting The Gas Mf

    (Figure 2). 51 in 23 1/2 in 2 11/16 in 41 5/8 in 24 1/2 in Figure 2 — External dimensions VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 19 New holes can be drilled in any location provided they do not interfere with the vibration isolator mounts. 2 in (x6) Ø7/16 in 21 in 42 in 16 in Figure 3 — Base plate VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 20 ☐ Connect the Gas MF to the gasoline fuel tank via the VMAC Fuel pump Kit (P/N: A500247). The fuel line must meet EPA and CARB evaporative emission regulations (Executive Order Number Q-19-011) Air Discharge ☐...
  • Page 21 While the American Welding Society® Safety & Health Fact Sheet No. 29 (Grounding of Portable and Vehicle Mounted Welding Generators) is a great reference for grounding the Gas MF, VMAC recommends working/consulting with a certified electrician and local regulatory bodies when grounding the Gas MF.
  • Page 22 (e.g. inside the cab, service body, or a cabinet). VMAC recommends that the harness extensions be soldered and sealed with heat shrink tubing, or sealed butt splices (not supplied) to provide durable, and moisture resistant connections.
  • Page 23 Connect the yellow remote start wire to one of the terminals on a Single Pole, Single Throw (SPST) switch and connect the other terminal to ground on the Gas VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...

  • Page 24: Completing The Installation

    Testing the System ☐ Connect a VMAC Air Test Tool (P/N: A700052) to the output of the air receiver tank (not the Gas MF discharge outlet; connecting the test tool directly to the Gas MF is only required when performance testing the compressor itself).

  • Page 25: Compressor Performance Testing

    Compressor Performance Testing System operation can be tested using the tools that will be operated by the system or by using the VMAC Test Tool (A700052) with the appropriate orifice in the outlet to simulate tool use (Figure 5). Ball valve...

  • Page 27: Multifunction Power System (Honda) Owner's Manual

    ® Multifunction Power System (HONDA) Owner’s Manual...

  • Page 29: Identifying Your System

    (Figure 7). GMF0001 A BC 123 Model number Unique identifier Production date code Revision letter Figure 7 — System ID breakdown VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...

  • Page 30: System Components

    • Remote Genset / Welder Control Box. ASP Tank). Main Component Locations Engine Control Box Generator diagnostic lamp ASP Tank Battery Compressor Engine Figure 8 — Major component location VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 31 Generator Door Generator door Figure 9 — Generator door Top Panel and Service Panel Top service panel Service panel Figure 10 — Top and service panels VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 32 Discharge Side Panel 120 V sockets discharge Terminal strip Discharge side Ground lug connections panel Figure 11 — Top and service panels Generator Generator Figure 12 — Generator VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 33 Inlet valve (#8 JIC) control Air/oil Valve discharge from compressor Oil filter Oil supply to Oil sight Oil drain compressor glass Figure 14 — ASP Tank VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 34 Compressor Oil scavenge Inlet valve control Inlet valve (from ASP) Clutch Oil supply Temperature sensor Inlet solenoid Air oil discharge Figure 15 — Compressor assembly VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 35 Error Weld alarm light Weld interlock Reset On/Off Voltmeter button button Figure 17 — Remote generator control box with Voltage Sense Interlock VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 36 Figure 18 — Digital display panel Hoses / Tubes VMAC compressor systems include hoses that include an AQP inner liner that is compatible with VMAC compressor oil. The PTFE tubes used in VMAC systems are rated for the high temperatures VMAC compressors generate. Use of hoses or tubes other than those supplied or recommended by VMAC may fail and/or cause compressor damage and may void warranty.

  • Page 37: System Specifications

    The small amount of oil recovered from the coalescing filter is returned directly to the compressor via a 1/4 in PTFE scavenge tube. The hot compressor oil is directed to VMAC’s liquid to air cooler (which is cooled via an electrically controlled fan) before being returned to the compressor.
  • Page 38 VMAC Cold Climate Kit (Optional) VMAC’s cold climate kit consists of a 110 V ac heater cartridge installed in the compressor housing and a 110 V ac pad heater installed on the ASP tank The VMAC Cold Climate Kit requires connection to either a 1,500 W power inverter (minimum) or ac "shore power"...

  • Page 39: Control System Features

    Running when not expected. Ǜ Starting error. Ǜ Low oil pressure. Ǜ • Separate error and warning message logging for both the engine and VMAC systems. • 200 hour and 400 hour compressor service reminders. • 100 hour engine service reminders. •...

  • Page 40: Control System Terminology

    If the control system detects air use, it will return the system to the "RUNNING" state, engage the compressor clutch, and increase the engine rpm to the second speed, to meet the demand. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 41 Once in the "STOPPING" state, the system will shut down. If the system is still pressurized, it will blow down air pressure from the compressor and the ASP. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...

  • Page 42: Cold Or Hot Weather Operation

    Owner’s Manual (P/N: 1901216) for cold climate operation. The HONDA iGX800 fuel injection control system is designed to compensate for cold climate conditions and does not require starting aids. The VMAC Cold Climate Kit includes a ASP Tank heater and compressor heater cartridge to speed warming of the compressor oil.

  • Page 43: Starting And Stopping The Gas Mf

    The control system will prevent the engine speed from ramping up, or the generator from engaging until the engine temperature is above 10 °C (50 °F) VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 44 Press the “ENTER” button. The Display Box will indicate “STOPPING” and the system will initiate the shut down sequence. ☐ Turn the ignition key to “OFF”. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...

  • Page 45: Battery Charging / Boosting And Welding

    Observe the battery voltage using the Voltmeter*. ☐ *12 V systems should indicate battery voltage above 2.0 V. ☐ *24 V systems should indicate battery voltage above 14.0 V. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 46 INTERLOCK” button is not required when returning the “WELD” selection knob to 0 V). For a list of Welder Control Box error messages and troubleshooting steps, see page 76. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 47 Getting Started Guide Read the warnings listed on page 43 prior to proceeding. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...

  • Page 48: Diagnostics Mode

    Lists the 10 most recent system messages. See page 78 for a list of warning messages. "VIEW LOGGED SERVICES" Lists the 10 most recent services logged. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...

  • Page 49: Adjustable Parameters (User Setup)

    "STANDBY". Parameter Description Adjustment Default Value Allows the engine to restart COLD ENGINE if the engine begins to reach Enabled \ Disabled. Enabled. RESTART freezing temperatures. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 50 RESTART DELAY "UNLOAD" / "STANDBY" starts. If the Gas MF is connected to the vehicle's batteries, a setting of 5 minutes or more should be used). VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...

  • Page 51: Maintenance Schedule And General Maintenance Information

    Illustrated Parts Lists (IPL) The illustrated parts list can be a very useful resource when inspecting, diagnosing or repairing the system. The IPL is available free of charge from VMAC. Torque Specifications All fasteners must be torqued to specifications. Use manufacturers’ torque values for OEM fasteners.
  • Page 52 ASP. In order to maintain the warranty, VMAC, and Honda's maintenance schedules must be followed. Only genuine VMAC and Honda parts can be used to maintain the system. With proper maintenance, the likelihood of premature failure or component replacement can be drastically reduced.
  • Page 53 Change the engine oil. • Replace fuel filter. • Change the engine oil filter. • Replace engine air filter. • Replace spark plug. Table 4 — Engine service intervals VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...

  • Page 54: Maintenance And Repair Safety

    Use only genuine VMAC parts to maintain the system. Genuine VMAC parts are designed to work with the high pressure and heat generated by the compressor. Substituted parts may void the warranty and could cause equipment damage, injury, or death.

  • Page 55: Regular Inspection Instructions

    Wear appropriate Personal Protective Equipment and follow all industry standard safety practices. The VMAC supplied and approved compressor oil must be used in this system. Failure to use this special oil will result in damage to the compressor and will void warranty.
  • Page 56 The compressor air filter can be accessed and changed from the top hatch of the Gas MF. Filter plate “step” Figure 21 — Install air filter element VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 57 ☐ If the pressure relief valve is showing loss of functionality, contact a local VMAC dealer for a replacement. While the pressure relief valve can be accessed and changed from the service panel side of the Gas MF, removing the top panel will provide the easiest access.
  • Page 58 The engine oil dipstick is located beside the engine oil fill and can be accessed via the top hatch (Figure 23). Engine oil fill Oil dipstick Figure 23 — Inspecting the engine oil VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 59 If the pulleys are not properly aligned, check all fasteners to ensure that they are properly torqued and that there are no loose or worn components. See the system specific Illustrated Parts List (IPL) for VMAC supplied part numbers. VMAC Belt Routing Figure 24 —...

  • Page 60: General Service Information

    ☐ Check the old oil for any evidence of metal filings or contamination. If any metal filings are found, flush the hoses and the ASP using the VMAC flushing kit (P/N: A700214). Push-To-Connect Fittings (Figure 25) ☐...

  • Page 61: 200 Hour / 6 Month Service (Compressor)

    A clean engine and generator compartment, in addition to being more efficient, makes detecting issues (i.e. oil leaks, wire or hose abrasion, etc.) easier. VMAC recommends cleaning the Gas MF as part of regular servicing. ☐...
  • Page 62 3/4 to 1 turn to seat the gasket. ☐ Remove the oil fill cap (Figure 28). Oil fill cap Oil sight glass Figure 28 — Fill oil VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 63 P-clips or cable ties. ☐ Inspect all hoses for signs of wear. If signs of wear are present, take appropriate action to prevent further wear. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 64 Cycle through the menus using the “►“ button; once “SERVICING” is displayed, press the “ENTER” button. ☐ Press the “ENTER” button again to log the service. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...

  • Page 65: 400 Hour / 1 Year Service (Compressor)

    A clean engine and generator compartment, in addition to being more efficient, makes detecting issues (i.e. oil leaks, wire or hose abrasion, etc.) easier. VMAC recommends cleaning the Gas MF as part of regular servicing. ☐...
  • Page 66 3/4 to 1 turn to seat the gasket. ☐ Remove the oil fill cap (Figure 32). Oil fill cap Oil sight glass Figure 32 — Fill oil VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 67 Clean any loose debris from around the air filter housing to prevent contaminants from entering the system. ☐ Remove the air filter cover and the filter element. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 68 Once the system has sat for 5 minutes, check the oil level in the sight glass and add oil as necessary. ☐ Verify there are no oil leaks. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 69 Cycle through the menus using the “►“ button; once “SERVICING” is displayed, press the “ENTER” button. ☐ Press the “ENTER” button again to log the service. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...

  • Page 70: 100 Hour / 6 Month Service (Engine)

    A clean engine and generator compartment, in addition to being more efficient, make detecting issues (i.e. oil leaks, hose or electrical harness wear, etc.) easier. VMAC recommends cleaning the Gas MF as part of regular servicing. ☐...
  • Page 71 There is no way to clear the engine service reminder. Engine service reminders are displayed for 2 hours prior to the service being due, and for an additional 2 hours after the service was due. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...

  • Page 72: 300 Hour / 1 Year Service (Engine)

    A clean engine and generator compartment, in addition to being more efficient, make detecting issues (i.e. oil leaks, hose or electrical harness wear, etc.) easier. VMAC recommends cleaning the Gas MF as part of regular servicing. ☐...
  • Page 73 Install the (×2) supplied spark plugs. ☐ Place appropriate absorbent material under the fuel filter to collect fuel spills (Figure 39). Fuel filter Figure 39 — Fuel filter VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 74 There is no way to clear the engine service reminder. Engine service reminders are displayed for 2 hours prior to the service being due, and for an additional 2 hours after the service was due. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...

  • Page 75: Diagnostics And Troubleshooting

    Additional troubleshooting and specific test procedures can be found on VMAC’s Knowledge Base www.kb.vamacair.com. See "Diagnostics Mode" on page 46 for instruction to access diagnostic information. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 76 The voltage signal from • Pressure sensor faulty. AIR PRESS SIGNAL the air pressure sensor is VOLTAGE HIGH • Wiring to pressure sensor faulty. above the expected value. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 77 CONN ERROR Control Box and Display Box. Control Box. END OF ERRORS RE- All errors have been Press “ENTER” button to start Gas — TRY STARTING? reviewed. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 78 Return the “WELD” selection knob to 0 V. ☐ Press and hold the “RESET” button for 2 seconds. ☐ If the error persists, contact VMAC for support. Error Description Corrective Action Gas MF output voltage is greater than 20 V (12 V boost mode) or 38 V (24 V boost mode).
  • Page 79 • Sensor failure. • Harness fault. Abnormal TE sensor. • Sensor failure. • Harness fault. Abnormal MAP sensor. • Sensor failure. Abnormal CPU. EEPROM or CAN communication error VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 80 30 the battery restart delay timer DUE TO LOW BATT seconds. has counted down, the system will enter standby mode and shut down. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 81 Engine is too cold to start: -40 °C (-40 °F) and below The engine is too cold. Plug the VMAC Cold Climate Kit in to warm the engine. Engine is too cold to engage compressor, or generator 10 °C (50 °F) and below Allow the engine to run until it reaches operating temperature.
  • Page 82 (No ac / dc output). speed (elevated rpm). on page 82 See Knowledge Base article: EXT-MF-005 "TESTING Internal generator issue. MULTIFUNCTION AC AND DC CIRCUITS". VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 83 Refer to “Excessive oil in the Excessive oil in the air stream. air stream (oil carry over) “ on page 80 to troubleshoot. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 84 Filter/Regulator/Lubricator Check drain on filter. failure (if installed). Water in the air stream. Air receiver tank not drained Drain air receiver tank daily. regularly (if installed). VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...

  • Page 85: Air Receiver Tank

    The VMAC compressor system will automatically depressurize when shutdown. The liquid to air cooler has a built in check valve that prevents blow back and moisture from the receiver tank entering the ASP. Installation of an additional check valve will cause erratic performance.

  • Page 86: Recommended Accessories

    Recommended Accessories While the compressor system will function without the following accessories, VMAC strongly recommends their use for optimal performance. See the “Accessory Product” section of this manual on page 85 for a list of products available for purchase through VMAC.

  • Page 87: Accessory Products From Vmac

    Accessory Products from VMAC Compressor Service Kits 200 Hour or 6 Month Service Kit - Part number: A700333 Includes VMAC high performance compressor oil, oil filter, air filter, and next service due decal. 400 Hour or 1-Year Service Kit - Part number: A700334...
  • Page 88 Part number: A300047 Air receiver tanks are used for lowering compressor duty cycle and removing water from compressed air. Recommended for optimum operation of VMAC Hydraulic Air Compressors, VMAC Gas Driven Air Compressors, UNDERHOOD40, UNDERHOOD70 (including Green Series Air Compressors), DTM70/ DTM70-H, and VMAC Multifunction Power Systems, which include standby mode;...
  • Page 89 6 ft (1.8 m). Part number: A500019 Current control extension cable 25 ft (7.6 m). Part number: A500028 Remote welding control extension cable 10 ft (3 m). VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 90 Part number: A500029 Allows the Gas Multifunction to be controlled via various crane remotes; converts latching or momentary switched 12 V signals into the low side switching required by the VMAC Multifunction control system. External Gas Fuel Pump Kit Part number: A500247...
  • Page 91 12 USG (45.4 L) gasoline fuel tank mounts directly to the Gas MF; includes EPA/CARB compliant: fuel tank, fuel cap, fuel lines, evaporative emissions port with carbon canister, low fuel switch, and mounting frame. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 92 Notes VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
  • Page 93 Notes VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...

  • Page 94: Warranty Registration

    Warranty Registration This form must be fully completed and returned to VMAC at the time of installation. Warranty may be void if this form is not received by VMAC within 30 days of installation. VMAC’s Warranty policy and registration can be viewed online at: www.vmacair.com/warranty...
  • Page 96 Manufactured by ® 888-241-2289 tech@vmacair.com 877-740-3202 warranty@vmacair.com www.vmacair.com kb.vmacair.com 1333 Kipp Road, Nanaimo, B.C., V9X 1R3 Canada...

Table of Contents