Improving Fuel Economy And Reducing Co Emissions; Handling The Unexpected; Smart Entry Remote Battery Strength; Shift Lever Does Not Move - Honda Civic Hatch 2017 Owner's Manual

Hide thumbs Also See for Civic Hatch 2017:
Table of Contents

Advertisement

DRIVING
How to Refuel
Your fuel tank features a capless design. You can insert the filler nozzle directly
into the filler neck. The tank seals itself when you pull out the filler nozzle.
1. The fuel fill door is located at the left rear of the
vehicle. Park next to the service pump that is
most accessible.
2. Turn off the engine.
3. Press the area indicated by the arrow in the
image to open the fuel fill door. The vehicle must
be unlocked.
4. Insert the filler nozzle fully. When the tank is full,
the nozzle clicks off automatically. Wait about 5
seconds before removing the filler nozzle.
5. Close the fuel fill door.
Improving Fuel Economy and Reducing CO
Achieving fuel economy and reducing CO
factors, including driving conditions, load weight, idling time, driving habits, and
vehicle condition. Depending on these and other factors, you may not achieve the
rated fuel economy of this vehicle.
114 |
Emissions
2
emissions is dependent on several
2

HANDLING THE UNEXPECTED

Learn about what to do in critical or emergency situations.

Smart Entry Remote Battery Strength*

If the battery life in your remote transmitter is weak, a message appears in the
display with information on how to start the engine.
1. Touch the back of the remote transmitter to the
ENGINE START/STOP button while the indicator is
flashing.
2. With the brake pedal or clutch pedal pressed,
press the ENGINE START/STOP button within 10
seconds.

Shift Lever Does Not Move*

If you cannot move the shift lever out of Park (P), follow the procedure below.
1. Set the parking brake.
2. Remove the key from the ignition or remove the
built-in key from the remote transmitter.
3. Move the removable beverage holder tray
rearward.
4. Wrap a cloth around the tip of a small flat-tip
screwdriver to remove the cover of the shift lock
release slot. Put the tip of the flat-tip screwdriver
into the slot and remove it, as shown in the image.
5. Insert the key into the shift lock release slot.
6. While pushing the key in, press the shift lever
release button and place the shift lever into Neutral
(N). The lock is now released. Have the shift lever
checked by a dealer as soon as possible.
HANDLING THE UNEXPECTED
Cover
Slot
Release
button
Shift lock
release slot
*if equipped
| 115

Advertisement

Table of Contents
loading

Table of Contents