Sony ILCE-6700 Help Manual page 348

Help Guide
Interchangeable Lens Digital Camera
ILCE-6700
α6700
Shoe Audio Set.
Sets the digital audio transmitted from a microphone (sold separately) attached to the multi-interface shoe of the camera.
Use a microphone that supports the digital audio interface. You can set the sampling frequency, the number of
quantization bits, and the number of channels. This function cannot be used during slow-motion/quick-motion recording
and time-lapse movie recording.
MENU → (Shooting) → [Audio Recording] → [
1
Menu item details
:
Sets the sampling frequency of audio input to 48 kHz, the number of quantization bits to 24 bits, and the number of
channels to 4.
:
Sets the sampling frequency of audio input to 48 kHz, the number of quantization bits to 24 bits, and the number of
channels to 2.
:
Sets the sampling frequency of audio input to 48 kHz, the number of quantization bits to 16 bits, and the number of
channels to 2.
Hint
The audio level display on the monitor is for 4 channels during 4-channel audio recording.
Note
When an external microphone (sold separately) is connected to the
recorded from the external microphone attached to the
If the attached microphone is set to analog transmission, you cannot set [
When the attached microphone does not support 4-channel audio recording, you cannot select [
4ch).
When the attached microphone does not support 24-bit audio recording, [
] (48khz/16bit 2ch).
Audio cannot be recorded correctly in the following situations during movie recording:
When you attach or remove the microphone
When digital transmission is switched to analog transmission or vice versa on the microphone side
Related Topic
4ch Audio Monitoring (movie)
Shoe Audio Set.] → desired setting.
(microphone) terminal of the camera, the audio is
(microphone) terminal. You cannot set [
Shoe Audio Set.].
Shoe Audio Set.] becomes locked to [
348
Shoe Audio Set.].
] (48khz/24bit
TP1000828546