Sony ILCE-6700 Help Manual page 133

Help Guide
Interchangeable Lens Digital Camera
ILCE-6700
α6700
Selecting the focus area (Focus Area)
Set the type of focusing frame when shooting with the auto focus. Select the mode according to the subject.
MENU → (Focus) → [Focus Area] → [
1
Menu item details
Wide:
Focuses on a subject covering the whole range of the screen automatically. When you press the shutter button halfway
down in the still image shooting mode, a green frame is displayed around the area that is in focus.
Zone:
Select a zone on the monitor on which to focus, and the product will automatically select a focus area.
Center Fix:
Focuses automatically on a subject in the center of the image. Use together with the focus-lock function to create the
composition you want.
Spot: S/Spot: M/Spot: L:
Allows you to move the focusing frame to a desired point on the screen and focus on an extremely small subject in a
narrow area.
Expand Spot:
If the product cannot focus on a single selected point, it uses focus points around the [Spot] as a secondary priority area
for focusing.
This setting is available only when the [
and held halfway down, the product tracks the subject within the selected autofocus area. Point the cursor at [Tracking]
on the [ Focus Area] setting screen, and then select the desired area to start tracking using the left/right sides of the
control wheel. You can also move the tracking start area to the desired point by designating the area as a [Tracking:
Zone], [Tracking: Spot S]/[Tracking: Spot M]/[Tracking: Spot L] or [Tracking: Expand Spot].
Hint
In the default settings, [
Note
[ Focus Area] is locked to [Wide] in the following situations:
[Intelligent Auto]
[Scene Selection]
The focus area may not light up during continuous shooting or when the shutter button is pressed all the way down at once.
Tracking:
Focus Mode] is set to [Continuous AF]. When the shutter button is pressed
Focus Area] is assigned to the C2 button.
Focus Area] → desired setting.
133