Adjusting The Grinding Level; Cup Heater; Activating And Deactivating The Cup Heater; Basic Settings - Siemens EQ300 TF303E07 Information For Use

8.1 Adjusting the grinding
level
Set the desired grinding level while
the coffee beans are being ground.
WARNING
Risk of injury!
The grinder rotates.
Never reach into the grinder.
▶
ATTENTION!
Risk of damage to the grinder. The
grinder may be damaged if the grind-
ing level is not set properly.
Only set the grinding level when
▶
the grinder is running.
Select the grinding level using the
▶
rotary selector step by step.
Grinding level Setting
Fine grinding
level for lightly
roasted beans
Coarse grind-
ing level for
dark-roasted
beans
The grinding level setting only
takes effect after the second cup.
Tip: If the coffee is only dispensed
drop by drop, set a coarser grinding
level.
If the coffee is too thin with too little
crema, set a finer grinding level.
1
Depending on the appliance specifications
Turn rotary se-
lector anticlock-
wise.
Turn rotary se-
lector clockwise.
9 Cup heater
You can use the cup heater to pre-
heat your cups.
9.1 Activating and deactivat-
ing the cup heater
WARNING
Risk of burns!
1
The cup heater
hot.
Never touch the cup heater
▶
hot.
Allow the hot cup heater
▶
down before touching it.
Tip: Place the cups with their base
on the cup heater to warm them to
1
optimum effect
To activate or deactivate the cup
▶
1
heater , press the
10 Basic settings
You can configure the basic settings
for your appliance to meet your
needs and call up additional func-
tions.
10.1 Changing the basic set-
tings
Press and hold buttons
1.
simultaneously for at
least 3 seconds.
Press button
2.
peatedly until the display shows
the required setting.
Confirm with "ok" button
3.
Press the button
4.
change the setting.
Cup heater en
1
1
can become very
1
1
to cool
.
button.
and
re-
⁠ .
while
to
49