Related Manuals for cam PFF Series
Summary of Contents for cam PFF Series
- Page 1 Original operating manual Operating manual Pallet forks frame PFF-series Flexibility & experience 01/2022 – V01 from serial n° 001...
- Page 2 © 01-2022. CAM attachments is a trademark of TVH Parts Holding NV, Brabantstraat 15, B-8790 Waregem. All rights reserved. No part of this publication may be reproduced or communicated in any form or by any means, electronic or mechanical, including copying, recording or use in an information storage or retrieval system, without prior and explicit permission of TVH Parts Holding NV.
- Page 3 Bulgarian Можете да намерите това ръководство на Вашия език чрез линка, посочен по – долу. Czech Tento návod najdete ve svém jazyce prostřednictvím odkazu níže. Danish Du kan finde denne vejledning på dit sprog via nedenstående link. German Sie finden diese Bedienungsanleitung in Ihrer Sprache unter folgendem Link. Greek Μπορείτε...
- Page 4 Thank you for using our product. For your safety and to ensure a correct operation, we would like to bring to your attention some aspects of this manual: • This booklet supplies useful instructions for the correct operation and maintenance of the product. It is, therefore, necessary to pay the utmost attention to all of the paragraphs that illustrate the most simple and secure way to operate and use this product.
-
Page 5: Table Of Contents
CONTENTS INTRODUCTION ..................... DESCRIPTION . -
Page 6: Introduction
INTRODUCTION This manual contains all the necessary information on the installation and operation of the pallet forks frame. Some of the maintenance operations should only be carried out by professional technicians. If you require this information and the maintenance steps, please contact your dealer. Also included in this manual are a number of safety instructions to create a safe working environment. -
Page 7: Description
Technical data Always check the type plate for the correct information. Telehandler Fork carriage FEM 2 Capacity (kg) 1500 Frame width (mm) (A) 1200 Machine type CAM REF Manitou CC26544 JCB Q-fit CC26560 Merlo ZM2 CC26660 Matbro CC26662 Dieci CC26682... - Page 8 Fork carriage FEM 3 Capacity (kg) 5000 Frame width (mm) (A) 1200 1500 Machine type CAM REF CAM REF Manitou CC26538 CC26552 JCB Q-fit CC26540 CC26568 Merlo ZM2 CC26542 CC26580 Matbro CC26588 CC26590 Merlo ZM3 CC26672 CC26674 Dieci CC26690 CC26692...
-
Page 9: Main Components Of The Product
Fork carriage FEM 2 Capacity (kg) 2500 Frame width (mm) (A) 1200 1500 2000 Machine type CAM REF CAM REF CAM REF 3-punkt Cat 2 CC26632 CC26634 CC26636 ÅLÖ (Quicke n° 3) CC26640 CC26642 CC26644 EURO (Quicke n° 8) CA99536... -
Page 10: Placement Of The Decals
Weight (kg) Capacity (kg at mm) 2.4. Type plate N° Explanation CAM attachments Brabantstraat 15 BE – 8790 WAREGEM CAM attachments logo BELGIUM Type www.camattachments.com T +32 56 43 42 11 F +32 56 43 44 88 info@camattachments.com Serial number... -
Page 11: Safety Instructions
SAFETY INSTRUCTIONS 3.1. General safety instructions • Never exceed the maximum allowed capacity that is indicated on the type plate or in this manual. • Read the operating manual before operating. • Do not use a pallet forks frame unless you are of age. •... - Page 12 In the event that equipment, procedures, work methods or working techniques are used that are not specifically advised by the CAM attachments company, it is necessary to make sure that there is no danger to the operator or other people.
-
Page 13: Transport And Storage
TRANSPORT AND STORAGE 1. Transport If you want to transport the pallet forks frame on a pallet, make sure that the attachment is securely attached so that it can’t fall off. Safely transport the pallet forks frame by following the next steps: 1. - Page 14 3. Use the tilt cylinders to tilt the quick-release frame forward. 4. Unlock the hooks from the guide lugs on the quick-coupling system. 5. Drive backwards with the hooks in the correct position. 6. Your pallet forks frame is now disconnected from the telehander/tractor-loader.
-
Page 15: Assembly And Installation
• The assembly and installation must be carried out by an expert. • Make sure that the goods and packaging are in good condition. • Before commissioning, carry out a risk analysis on the assembly of the CAM attachment with the forklift. - Page 16 4. Use the tilt cylinders to tilt the quick-release frame forward. 5. Attach the pallet forks frame to the front loader. 6. Make sure that the hooks fall between the guide lugs on the quick-coupling system. 7. Use the tilt cylinders to tilt the quick-release frame backwards.
- Page 17 • Make sure that the locking pins of the machine locked the attachment securely to the loader. • After the installation of the attachment and before putting the device into operation, check if all the functions work correctly. Any failure of the safety devices can cause malfunctioning and damage to the attachment. If you want to disconnect the pallet forks frame, you need to follow the procedure the other way round.
-
Page 18: Operation
• For safety reasons, arbitrary adaptations or modifications to the equipment are prohibited. • In the event of non-envisaged workmanship or intervention or following a procedure different to that indicated in the manual, consult CAM attachments before proceeding in order to ascertain its feasibility. -
Page 19: Operating Instructions
6.2. Operating instructions Perform the daily maintenance check before each use as described in chapter ‘7.3. Maintenance instructions’ . Make sure you follow the steps below before you put the pallet forks frame into operation: 1. Mount the FEM attachment/FEM forks onto your pallet forks frame (see chapter ‘5. Assembly and installation of the product’). -
Page 20: Maintenance
Maintenance instructions In the event of problems or if operations are to be undertaken that are not specifically described in this manual, consult CAM attachments or the retailer. 1. Daily maintenance check A daily check of the pallet forks frame can limit wear to a minimum. - Page 21 2. Cleaning Only clean the equipment with a cloth dampened in a soap solution (REF 131TA5500)* or TotalSource wipes (REF 147TA3378). Do not use solvents, petrol, strong detergents etc. If the equipment is heavily soiled, the use of a pressure cleaner is only permitted providing that it is set to a maximum of 200 bar.
-
Page 22: Troubleshooting
TROUBLESHOOTING N° Problem Cause Action The pallet forks Damage to the pallet forks frame Replace the pallet forks frame by a new frame no longer fits the machine The hooks don’t fit between the guide Make sure that the hooks fall between the lugs on the quick-coupling system guide lugs on the quick-coupling system The clearance... -
Page 23: Final Decommissioning And Disposal
FINAL DECOMMISSIONING AND DISPOSAL Final, proper decommissioning or disposal of the product must be performed in accordance with the regulations of the country in which the product is used. In particular, regulations governing the disposal of batteries, fuels and electronic and electrical systems must be observed. Waste packaging should be sorted and put into solid dustbins according to the materials and needs to be collected by the local special environmental protection bureau. -
Page 24: Annexes
ANNEXES 10.1. CE certificate 24/28... - Page 25 25/28...
- Page 26 NOTES ................................
- Page 27 NOTES ................................
- Page 28 Your distributor: Manufactured outside the EU for TVH PARTS HOLDING NV. www.camattachments.com Agri info@camattachments.com Construction Industry Brabantstraat 15 Food & 8790 Waregem beverage Belgium Paper T +32 56 43 42 11 handling F +32 56 43 44 88...