Table of Contents
Advertisement
Important Safety Instructions
Moving parts: Keep body parts away from moving parts
NOTE: Some of symbols shown above may not be affixed depending on the product.
■
Moving
CAUTION
• Before moving the printer, turn it off, remove the power plug from the power outlet, and disconnect
the interface cable. Otherwise, the power cord and other cables could be damaged, resulting in a fire or
electric shock.
• When carrying the printer, be sure to hold it at the bottom with
both hands so that it does not fall down.
• Always hold the printer level and carry it slowly. If ink is spilled inside the printer while moving it, this
could cause a fire or serious electrical shock or damage the printer.
• Before moving or shipping the printer, be sure to execute [Moving The Printer] or [Shipping The Printer]
from the printer driver. Also when shipping the printer, set the protectors.
Moving or Shipping the printer without taking necessary measures could cause ink leak inside the
printer, resulting in a fire, electric shock, or printer failure.
■
Maintenance and Inspections
WARNING
• To avoid a fire hazard, occasionally disconnect the power cord from the printer and the power supply
and use a soft dry cloth to clean the cord connectors and the connection points. Leaving the cord
plugged in and not cleaned for a long period, especially in an area subject to dust, oil, and high humidity,
could cause the insulation material to deteriorate.
• When cleaning the printer, do not use a flammable solvent (alcohol, thinner, etc.). If a flammable solvent
is brought into contact with the parts inside the printer, a fire or electric shock could result.
9
Advertisement
Table of Contents
