Advertisement
General Information
The IP-500G communicator is designed to report events
via an internet connection over a Wi-Fi network.
Communication formats:
The IP-500G communicator is designed to send alarm
signals to monitoring receivers that receive events
under the DC1 and SDC2 communication protocols.
It also allows reporting events in residential format to
the Garnet Control application with event restriction
by monitoring station.
Panel control modes:
The IP-500G communicator allows the panels to be
controlled via the Garnet Control application, through
the internet.
Compatible panels:
The IP-500G communicator is compatible with the
Garnet and DSC panel families.
For Garnet panels, the communicator must be installed
on the BUS-C485 data bus, while for DSC panels, the
communicator must be installed on the BUS-C485 data
bus, while for DSC panels, the communicator must be
installed on the BUS-C485 data bus.
data bus of the keyboards.
Compatible Garnet panel models:
PC-732G / A2K4-NG / A2K8
Models compatible with DSC panels:
PC585, PC1565, PC832, PC1832, PC5015, PC.5010,
PC161616
Technical Specifications:
WiFi
• Supply voltage: 12V
• Power consumption: 90 ~ 135 mA
• Transmission: WiFi certified 2.4Ghz, IEEE 802.11.
• FCC / CE-RED /IC / TELEC /KCC / SRRC / NCC Certified
• Transmitting power: 20.5 dBm.
• WiFi authentication via WEP, WPA-PSK and WPA2-PSK.
• Antenna: PCB trace type.
• Compatible with PC-732G / A2K4-NG / A2K8.
• 1 IP addressees for monitoring reports.
• Allows for panel and self programming with AC4
software and via the Garnet Programmer app.
• Residential format reports
• You can use domain names instead of IP addresses.
• Connection with dedicated bus (BUS-C485).
• Allows remote operation of the system via
smartphones using the Garnet Control App.
2
Connections:
BUS-C485 mode of operation:
Y
DSC mode of operation:
AC
- AUX +
G
B
A
-
+
PANEL DSC
KEY PAD
+ BELL -
1 PGM 2
Z1
COM
Z2
Z3
COM
Z4
RNG
YEL GRN
TIP
R-1
T-1 EGND
Advertisement
