Advertisement
RapidHot
Water System
™
Tubing from Ambient pathway travels to Hot Water Valve,
attached to Hot Tank.
Hot Water Tank is not pressurized, but extremely dangerous
to service when filled with Hot Water. To cool, turn Hot
Switch at rear of appliance to OFF. Then dispense water
from faucet using Hot Dispense button on Touch Screen until
water is cool. Then, water can be drained from Hot Tank by
removing drain plug located behind CO2 access door.
TRANSPORTATION: It is recommended to empty the
Hot Tank before transport, especially in temperatures below
freezing. The only outlet for water is through the Faucet or
the Drain Plug. The Hot Tank contains about 3lb (1.3kg) of
water and should also be emptied to make the appliance
lighter to carry. (See Page 30.)
REV 01
REV 02
For technical support contact Natural Choice at (USA) 815.874.4444
Inlet and
Hot Water
Valve
Insulated
Tank
Assembly
Outlet Tube
Overflow
Assembly
Vent Tube
13
NCC1004-17-R01
Advertisement
