SAFETY INSTRUCTIONS NOTICE AXS EC in-line duct fans are not explosion proof and should not be used when a potentially explosive situation exists. Do not use where temperatures will exceed 104 F. WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, INJURY TO PERSONS, PLEASE READ THESE INSTRUCTIONS CAREFULLY Before servicing or cleaning the unit, ensure that the electrical service to the fan is locked in the “OFF”...
Page 4
TYPICAL FAN INSTALLATION Fans may be mounted in ventilation shafts either vertically or horizontally. (Figure 1) The air motion in the system must be as shown with the pointer of the fan casing. In case of the vertical installation, the intake spigot must be protected with a ventilation hood. To attain the best performance of the fan and to minimize turbulence-induced air pressure losses while mounting, connect straight air duct sections to the fan spigots.
FAN INSTALLATION WARNING Disconnect and lock out power supply before performing any installation work. Working on or near energized equipment could result in death or serious injury. Fan installation is shown in Figures 2-7. The airflow direction should match that indicated on the fan housing.
WIRING DIAGRAMS WARNING Disconnect and lock out power supply before performing any installation work. Working on or near energized equipment could result in death or serious injury. MAXIMUM SPEED OPERATION GREEN +10V OUTPUT 0-10V INPUT SIGNAL WHITE BLACK TERMINAL BLOCKS 117 VOLT SUPPLY TACH FROM FUSE PANEL...
RECOMMENDED MAINTENANCE WARNING Make sure to disconnect the fan from the power mains prior to any cleaning. Proper maintenance (Figure 9-14) includes periodic cleaning of the fan surfaces from dirt and dust. The impeller blades require thorough cleaning every 6 months. Remove the self-tapping screws (Figures 11) and disconnect the grill from the casing.
ACCEPTANCE CERTIFICATE The AXS EC fan has been duly certified as serviceable. AXS100EC AXS125EC AXS150AC AXS200EC AXS250EC AXS300EC Manufactured on (date): Date of sale: Sold by: (name of trading enterprise, stamp of store) CONNECTION CERTIFICATE Company name: Electrician name: Date: Signature: Due to constant product improvements, some models may differ slightly from those portrayed in this manual.