Advertisement
Quick Links
Description
This devices features a PIR movement detector and a brightness sensor for automatic
activation of various types of loads following the detection of a movement and a
brightness level lower than the set level.
IT is possible to con gure several operating modes; for the detailed descriptions see
page 4.
Standards, Certi cations, Marks
Directive:
– Electromagnetic Compatibility Directive 2004/108/EC
Installation regulations:
– CEI 64-8
Product regulations:
– IEC 60669-2-1
– EN 50428
Environmental regulations:
– EU Directive 2002/96/EC: WEEE (Waste Electrical and Electronic Equipment)
– EU Directive 2002/95/EC: RoHS (Restriction of Hazardous Substances)
Dimensional data
Size:
45 mm
45 mm
Technical data
Voltage:
Maximum current draw:
Connection between sensor and actuator:
Sensor type:
Flush mounted box depth: 40 mm
Weight:
Impact resistance:
Penetration of solids and liquids:
Time delay:
Brightness:
Operating temperature:
Storage temperature:
2 ush mounted modules
51 mm
27 V=
15 mA
SCS BUS connector
PIR movement detector with 180° detec-
tion angle and brightness sensor.
60 g
IK04
IP20
from 5 sec to 59min. 59 sec
from 20 lux to 1275 lux
from -5°C to +45°C
from -20 °C to +70 °C
574046
067225
574096
AM5659
Front view
3
Legend
PIR sensor
1.
LEARN LED
2.
LEARN button
3.
Brightness sensor
4.
Movement sensor (under the lens)
5.
Two-way IR transmitter (under the lens)
6.
L/N/NT4659N
HD/HC/HS4659
4
6
5
1
2
Advertisement
Related Manuals for LEGRAND 574046
Summary of Contents for LEGRAND 574046
- Page 1 574046 067225 L/N/NT4659N 574096 AM5659 HD/HC/HS4659 Description Front view This devices features a PIR movement detector and a brightness sensor for automatic activation of various types of loads following the detection of a movement and a brightness level lower than the set level.
-
Page 2: Installation
574046 067225 L/N/NT4659N 574096 AM5659 HD/HC/HS4659 Installation Positioning the detector Position the sensor so that it is not a ected by the arti cial light already 2.5 m present in the room. ≥ 2.5 m Settings Sensor parameters Default value... - Page 3 574046 067225 L/N/NT4659N 574096 AM5659 HD/HC/HS4659 Walkthrough Advanced mode: If a movement is detected for a time of less than 20 s, the sensor will decrease Calibration the set time delay to 3 minutes. If the set delay time set is already less than three To calibrate the sensor, it is necessary to measure the lighting level present using minutes, it will remain as such.
-
Page 4: Con Guration
574046 067225 L/N/NT4659N 574096 AM5659 HD/HC/HS4659 Con guration 1. Lighting Management System When installed in a Lighting Management system, the device can be con gured in the - Push & Learn: procedure for pairing di erent connected devices or changing the assign- following ways: ments de ned automatically in the Plug &... -
Page 5: Maintenance
574046 067225 L/N/NT4659N 574096 AM5659 HD/HC/HS4659 1) Duration of the lights timer depending on the con gurator on T: 2) Sensitivity of the PIR and US movement detector depending on the con gurator on S: Con gurator on T Lights timer in minutes...