Advertisement
IDC Icemaker Adaptor Kit Installation Instructions
1.
Place ice slide into ice drop opening in bin (see Figure 2).
2.
Place Icemaker rail supports into pockets in the ice bin as shown in Figure 3.
3.
Place bar into first set of pockets inside the ice bin.
4.
Hook cross braces over top of bar and place into inner pockets inside the ice bin (at back end).
5.
Place Icemaker Adaptor Kit on top of unit.
6.
Place icemaker on top of kit. DO NOT slide icemaker into position on the lid.
7.
Apply continuous bead of NSF international (NSF) listed silastic sealant (Dow 732 or equivalent),
supplied in kit, to seal the icemaker to the top of the adapter kit. All excess sealant must be wiped
away immediately.
Publication Number: 629088667INS
Ice Slide
FIGURE 2 Ice Slide Assembly
FIGURE 3
- 2 -
Cross
Braces
Front Icemaker
Rail Support
© 2005-2010, IMI Cornelius Inc.
Advertisement
