Operation Via Bluetooth - AudioAffairs NRD 010 Operating Instructions Manual

Nostalgia Radio
Disconnecting
You can end the connection by ...
- switching off the Bluetooth function on the media playback device,
- selecting a different playback mode,
- pressing button 38 until you hear a beep,
- switching the Nostalgia Radio to standby mode,
- moving out of reception range.

15.2 OPERATION VIA BLUETOOTH

NOTE: it is possible that some devices will not support being remotely controlled by
the Nostalgia Radio.
Settings of the Nostalgia Radio
Function
Playback
Pause
Next track
Previous track
Beginning of current
track
Accepting incoming calls
1. An incoming call during playback will automatically reduce the volume and
sound the telephone call signal.
2. Answer the call as you would usually do. The call will use the telephone for audio.
3. When you are finished, hang up as you would usually do. The Nostalgia Radio will
resume playback after a few seconds.
Connecting an additional Bluetooth device
1. If you would like to connect another external Bluetooth device, press the button
38 until you hear a beep and Suchen (searching) flashes on the Nostalgia Radio
display.
2. Connect the new device as described above.
CUSTOMER SERVICE
00800 - 45622000
on the external device
Automatic playback or press button 38
During playback: Press button 38
Turn the PRESET dial to the right (+)
Turn the PRESET dial 2x to the left (-)
Turn the PRESET dial 1x to the left (-)
Bluetooth
www.gt-support.de
51