Playback Audio From External Devices (Aux) - AudioAffairs NRD 010 Operating Instructions Manual

Nostalgia Radio
4. Turn the PRESET dial to select the relevant sub-menu and press button 38 to
access the menu.
- Uhrzeit einstellen (Set time): setting the time
- Datum einstel (Set date): setting the date
- Autom. einstel (auto set): select between automatic tuning (von Sender (of sta-
tion)) and manual tuning (Manuell (manual)).
- 12/24 Anzeige (12/24 display): select the time format. The display will show AM if
you select the 12h time format before midday and PM if it is after midday.
5. Turn the PRESET dial to select the settings and press button 38 to save your
selection.
6. The menu will automatically disappear a few seconds after the settings are saved.
11. PLAYBACK AUDIO FROM EXTERNAL DEVICES
(AUX)
The AUX IN socket can be used to connect external devices, e.g. an MP3 player.
1. Use an audio cable to connect the audio output port of the external device, e.g.
MP3 player, with the AUX IN socket.
2. Switch the device on by setting the MAIN SWITCH to the ON (I) position.
3. Press the SOURCE button repeatedly until AUX-Eingang (AUX-In) appears on the
display.
4. Start the playback on the connected device.
5. The playback is controlled using the external device, but the volume can also be
adjusted using the Nostalgia Radio.
6. Switch off both devices before disconnecting.
NOTES:
• Please note that while in AUX mode, the volume can also be adjusted at the exter-
nal device.
• If the playback is distorted, reduce the volume level on the external device.
CUSTOMER SERVICE
00800 - 45622000
Playback audio from external devices
www.gt-support.de
43