Transportation, Storage And Disposal - Husqvarna Z554L Operator's Manual

Hide thumbs Also See for Z554L:
Table of Contents

Advertisement

Available languages

Available languages

Problem
The product moves slowly, with irregular
speed or not at all.
The drive of the blades do not engage.
The transaxle leaks oil.
The cutting result is unsatisfactory.
Transportation
The product is heavy and can cause crush
injuries. Be careful when you load it onto or off
a vehicle or trailer.
Load the product in reverse on approved ramps
of a maximum operation angle of 10°. Do not lift
the product.
Use an approved trailer for transportation of the
product.
Make sure that you have knowledge of local
road traffic regulations before transportation of
the product in a trailer or on roads.
Stop the fuel supply of the product.
Lock the product with approved devices, such as
straps. Use tie-down points on the product. The
parking brake is not sufficient to lock the product
during transportation.
28
Cause
The parking brake is engaged.
The bypass valve on the pump is opened.
The drive belt on the transmission is loose or damaged.
There is air in the hydraulic system.
The drive belt on the mower deck is loose.
The electromagnetic coupling contact is loose.
The drive of the blade is defective or loose from the cable con-
nectors.
A fuse is blown.
The seals, housing or gaskets are damaged.
There is air in the hydraulic system.
The tire pressure is different on the right and left sides. Refer to
Tire pressure on page 21 .
The blades are damaged.
The suspension of the cutting deck is not level.
The blades are blunt. Refer to
23 .
The product is operated at too high forward or rearward speed.
Refer to
The grass is long. Refer to
16 .
There is grass blockage in the cutting deck. Refer to
the product on page 19 .

Transportation, storage and disposal

To examine the blades on page
To get a good cutting result on page 16 .
To get a good cutting result on page
To tow the product
WARNING:
product, you must read and understand
the safety chapter. Refer to
page 7 .
Be careful when you tow the product.
Operate the product slowly when you tow the
product.
The breaking distance increases when you tow
the product. Make sure to decreases the speed
in time.
For safe operation, do wide turns.
Do not tow near ditches, open water, and other
dangerous areas.
To clean
Before you tow the
Safety on
2176 - 001 - 13.06.2023

Advertisement

Chapters

Table of Contents
loading

Table of Contents