Advertisement
Lumination
(LRX - Series)
®
Components
3
1
1
2
2
3
Frame Installation
Fixture Size
LRXS4
LRXS6
5.95-7.5 inch x 5.95-7.5 inch
LRXS8
7.95-9.5 inch x 7.95-9.5 inch
1
Cut the appropriate size hole into ceiling tile.
Adjust frame aperture size to be suitable for fixture, ensure
3
the fixture center installed. Then tighten both mounting
bracket wing nuts.
LED.com
© 2023 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change
without notice. All values are design or typical values when measured under laboratory conditions.
4
4
5
6
6
5
Square Hole Size
4.9-5.2 inch x 4.9-5.2 inch
Adjust aperture
Provided Item
1 Frame (4-inch, 6-inch or 8-inch)
2 Mounting brackets
3 L-Bracket
4 U-Bracket
5 Adjustable Bracket
6 Wing nut
NOTE: Part 4 is only for LRX EMBB version
Mounting brackets
Place side L-brackets on existing frame screws and tighten
2
with screwdriver on both sides of the frame. Then attach
mounting brackets to both L-brackets with wing nuts
(provided).
Slide hanger bars through adjustable mounting brackets.
4
IND327-Lumination-LRX-Series-Square-LED-Luminaire-Installation-Guide_R01
Installation Guide
Qty.
1
2
2
1
2
7
L-brackets
Page 2 of 4
(Rev 05/19/23)
Advertisement
