Advertisement
SELF DIAGNOSIS
If there is no image, the Self Diagnosis screen will be displayed.
Self Diagnosis function checks if the status of the monitor screen
is No Signal, Out of range or None support.
No Signal screen is displayed when the D-
Sub signal connector is connected but the
status of the monitor is on DPMS mode.
Out of Range screen is displayed when the
applied frequency is under or over normal
range.
Normal range
(Non-interlaced mode only)
H : 30 - 80 KHz
V : 56 - 77 Hz
None support screen is displayed when the
applied frequency is under or over factory
preset timings.
Check cable screen is displayed when the
signal cable is disconnected.
English - 10
SPECIFICA
TIONS
SPECIFICA
TIONS
Panel
Size
Pixel Pitch
Viewing Angle
Contrast Ratio
Brightness
Color Filter
Synchronization
Horizontal
Vertical
Video Bandwidth
Max Resolution
Optimal Resolution
Colors
Display Area
PC Input Signal
Sync
Video
Plug and Play
Power Source
Power Consumption
Dimension-W x H x D
Weight-net/gross
Power Saving
Tilt Range
Operating Temperature
The specification can be changed without any prior notice to improve the quality of the
product.
The LCD panel may have some defective pixels (e.g. slightly light or dark) due to a
characteristic of the LCD panel. But there is no defect in your LCD product itself.
English - 11
17-inch(43.2 cm) diagonal
0.264 x 0.264 mm
70°(Right/Left)
60°(up), 60°(down)
400:1 contrast ratio(typ)
2
brightness(typ)
250cd/m
RGB vertical stripe
30 - 80 KHz
56 - 77 Hz
140MHz
1280 x 1024@75Hz
1280 x 1024@60Hz
16M Colors
337.9 mm x 270.3 mm
H/V separate(TTL)
15 pin mini D-sub(Analog RGB)
VESA DDC Compatible
100-240 Vac, 50/60 Hz(Free Voltage)
35W
386 x 398 x 190 mm(with stand)
386 x 346 x 60 mm(without stand)
5.3/ 7.0 Kg (11.7/15.4 Lbs)
EPA, VESA DPMS, Nutek Compliant
5° forward, 30° backward
10 ~ 40°C /50 ~ 104°F
Advertisement
