STEP 1. Attach the TV Stand or Wall Mount Bracket
Attach the TV Stand
CAUTION:
• Be sure to disconnect the A/C power cord before installing a stand or Wall-Mount brackets.
• The LED display is very fragile and must be protected at all times when installing the legs that form the stand. Be sure to
protect the TV screen from getting scratched or damaged by any hard objects. In addition, DO NOT exert pressure on the
front of the TV at any time because it could crack.
Follow the illustrations and instructions below to complete the installation steps:
1. Carefully place your TV facedown on a soft, flat surface to prevent damage to the TV or scratching to the screen.
2. Remove the 2 stands from the accessory bag and then insert the stands into the bottom slots of the TV.
3. Secure the base stand to the TV with the 4 screws in accessary tightly.
Screw
BASE STAND
M4×25 (43")
M4×20 (50"/55")
6
BASE STAND
Screw
M4×25 (43")
M4×20 (50"/55")