Sharp AQUOS LC-43N6100U Quick Start Manual page 10

Attach the Wall Mount Bracket (not included)
Before you begin the third-party manufacturer instructions, be
sure to do the following things:
1.Place the TV face down on a clean, safe and cushioned surface.
2.Remove the TV stand if you already attached it.
3.Place the spacers (not included) in the corresponding bracket
holes.
Spacer
(not provided)
CAUTION:
• When you attach the mount, be sure to use the spacers
(provided by the third-party manufacturer) between the TV
and the bracket.
Screw
(not provided)
Bracket
(not provided)
• To prevent internal damage to the TV and ensure it is
mounted securely, be sure to use fixing screws (not
provided) that are 9.5 - 11.5 mm in length when measured
from the attaching surface of the mounting hook.
Rear cover of the TV
W all mount hole pattern
VESA (mm)
Wall mount screw size (mm)
Follow instructions provided with the Wall mount bracket.
● To complete the installation, please contact the wall-mount
manufacturer or the retailer from which you purchased the TV.
● The selected screws are 9.5 - 11.5 mm in length when
measured from the attaching surface of the rear cover. The
diameter and length of the screws differ depending on the
Wallmount bracket model.
NOTE: The diameter and length of the screws differ
depending on the wall mount bracket model.
7
9.5 - 11.5 mm
Wall mount bracket
Screw
Spacer
200 × 200 (43"/55")
200 × 400 (50")
M6