Craftsman 247.29934 Operator's Manual page 12

air filTer
The air filter is a device on the engine air intake that prevents dust and
dirt entering the engine. See Figure 12.
MUffler
Engine exhaust exits the engine via the muffler. See Figure 12.
oil fill caP & DiPSTick
Engine oil level can be checked and oil added through the oil fill. See
Figure 12.
NOTE: This unit was shipped WITHOUT oil in the engine. Oil is
included in the plastic bag packed with the manual in with the unit.
Add the oil as directed in the Gas & Oil Fill Up section. Check the oil
level before each operation to ensure adequate oil is in the engine.
For further instructions, refer to the steps in the Engine Maintenance
section of this manual.
forWarD Tine engageMenT leVer
The forward tine engagement lever controls the engagement of the
tines. Release the lever to stop the tines. See Figure 12.
OPERATION
DePTh STake
The depth stake controls the tilling depth. See Figure 12.
hanDlebar heighT aDjUSTMenT
The handle height may be adjusted. Loosen the knob to change the
position. Tighten hardware when complete. See Figure 12.
TineS
Tilling tines are used to cultivate, furrow and prepare your garden for
seeding. See Figure 12.
12