Philips DC200 Quick Start page 2

D1, D2, D3
3
E3
B2, B4, C2
A
ENGLISH
Step A
• Connect the supplied mains adapter to the
set's 9V DC jack and the plug into a wall outlet.
Step B
How to set the Clock & Alarm time
11 Press and hold SET TIME or 1 ALM/2 ALM
until the hour digits flash.
∞ §
21 Press and hold to adjust time.
31 Press SET TIME or 1 ALM/2 ALM to confirm.
steps 2-3 to complete all the
• Repeat the
other time items setting.
Selecting the Alarm mode
∞ §
41 Press /SOURCE repeatedly to select
your desired alarm mode.
• For Nature sound mode, press ALBUM/PRESET
1 2
-/+ / to select your desired nature sound track.
Helpful hints:
– If you have selected TUNER alarm mode, make
sure you have properly tuned to a station before
turning off the set (See Tuning to radio station).
– If you have selected iPod/USB alarm mode,
make sure you have connected the compatible
iPod player or USB device, or the buzzer mode
will be selected automatically.
3 ways to switch off the alarm
POWER 2 or REPEAT
• Either press briefly:
ALARM/
BRIGHTNESS CONTROL
1 ALM or 2 ALM.
• Press
Step C
Tuning to radio station
11 SOURCE once or more to switch on
Press
the radio.
∞ §
21 Press repeatedly to tune to your
station.
DC200_93_QSG.indd 2
All manuals and user guides at all-guides.com
• To store a preset, press
programming, and then press ALBUM/PRESET
1 2
-/+ /
to select a desired preset number, and
then press PROG again to confirm.
• To store preset radio stations automatically, press
and hold PROG for more than two seconds.
Step D
Playing Apple iPod using DC200
11 Remove the top cover of dock.
21
Snap the correct adaptor (supplied) into the
dock to provide a snug fit for the iPod player.
• The indication on the adaptor's back fits
specific iPod player.
31 Snap the compatible iPod into the dock
connector.
41 Press SOURCE repeatedly to select the iPod
mode.
• The connected player will play automatically.
Helpful hints:
– By using the buttons (
VOLUME ) on the DC200, the following iPod
playback features are available: Play/Pause,
selecting next/previous track, fast forwarding/
rewinding and changing volume.
– Refer to the user manual supplied for detailed
descriptions of "Compatible portable player",
"Selecting the correct dock adaptor" and the
important notes for dock operation.
Step E
1
Playing a USB mass storage device
11 Make sure that your DC200 is being powered
by AC mains.
21 Press SOURCE repeatedly to select the USB
mode.
31 Plug a compatible USB mass storage device to
DC200's USB port marked
Playback will start automatically.
Ü
C1, D4, E2
B1, B3
C2
3
PROG to activate the
∞ §
2; , , and
.
6/12/2009 10:57:49 AM