Connect The Usb Cable Between Sonocaddie V300 And Computer - Sonocaddie V300 User Manual

User's Guide
2. After completing installation, please press "Close" to finish. A Sonocaddie shortcut
will appear on your desktop. Double clicking the Sonocaddie shortcut icon will start
"Sonocaddie V300" software.

4.1.3 Connect the USB Cable between Sonocaddie V300 and Computer

Step 1. Turn on Sonocaddie V300.
Step 2. Connect the USB Cable between Sonocaddie V300 and Computer. You will
see the message "USB cable connected. Enable USB link now? " on the Sonocaddie
display. Please press "YES" (right soft key) to link the unit with your computer.
Page 13
This document is the property of Sonostar Inc. Any unauthorized reproduction is prohibited.