Scandomestic SKS 201 W User Manual page 26

Changing the door direction
1. Before reversing the door's opening direction, unplug the appliance and remove all food.
2. Using a flat screwdriver pry and remove hinge caps (if appropriate).
3. Using a Phillips screwdriver remove the door upper hinge while holding the door (step. 1).
4. Tilt the appliance (up to 40 degrees) to have sufficient access to the lower hinge (step. 2).
5. Using a Phillips screwdriver, remove the lower door hinge.
6. Attach the lower hinge on the other side (step. 3).
7. Position the door assembly in such a way so that pin of the lower hinge is aligned with the appropriate hole of the lower door bracket.
8. Attach the middle hinge on the other side of the appliance so that the lower pin of the middle hinge is aligned with the appropriate
hole of the upper door bracket. Position the second door assembly so that the upper pin of the middle hinge is aligned with t he
appropriate hole of the lower door bracket (step 4). *
9. Check that the door is properly aligned with the cabinet.
10. Switch on the appliance as described in the relevant section of its operating instructions.
* This action applies to appliances with both refrigeration and freezer chambers.