Table of Contents
Advertisement
NL
Troubleshooting
1 9 Troubleshooting
K You can rectify minor faults on the device yourself. Consult before using
contact customer service for troubleshooting information. This way you avoid
unnecessary costs.
WARNING
Risk of electric shock! Improper repairs
are dangerous.
Only trained specialist personnel may carry out repairs on the device.
▶
Only original spare parts may be used for repairing the device.
▶
If the power cord of this appliance becomes damaged, it must be replaced by
▶
the manufacturer, its service agent or a similarly qualified person in order to
avoid a hazard.
Malfunction
"Hot" and drum
turns.
Buzzing sound.
The display is extinguished
flashes.
and
"CAre"
The anti-crease function
takes too long.
Device not working.
50
Cause and Troubleshooting
Cooling process active.
No malfunction.
1.
Do not change the program during the cooling process.
2.
Remark:The cooling process takes up to 10 minutes.
You can continue to operate the device.
Compressor active.
No error - normal operating noise.
▶
Energy saving mode is active.
Press any button. aThe display
▶
lights up again.
After some time of use, the device automatically
recommends simple device care.
Perform simple device maintenance on the device.
▶
→ "Device care", page 45
A low ambient temperature extends the time of the
anti-crease function.
No error - no action required.
▶
Fluff filter is dirty.
→ "Clean the fluff filter", page 36
▶
Mains plug of the power cable is not plugged in.
Connect the device to the power supply.
▶
The fuse in the fuse box has blown.
Check the fuse in the meter cupboard.
▶
Advertisement
Table of Contents
