Chipset Configuration - Gigabyte R163-SG0-AAC1 User Manual

5-2-9 Chipset Configuration

Parameter
Restore on AC Power Loss
P2P Bridge IO Size
SATA HDD Security Frozen
NVMe SSD Security Frozen
NVMe OPROM Select
NVMe LED Control
(Note) When the power policy is controlled by BMC, please wait for 15-20 seconds for BMC to save the
last power state.
Description
Defines the power state to resume to after a system shutdown that is
due to an interruption in AC power. When set to Last State, the system
will return to the active power state prior to shutdown. When set to
(Note)
Power Off, the system remains off after power shutdown.
Options available: Last State, Power Off, Power On, Unspecified. The
default setting depends on the BMC setting.
Specifies P2P Bridge IO aligned to the size.
Options available: 0x100, 0x150, 0x1000. Default setting is 0x1000.
Enable/Disable this item to send freeze lock command to SATA HDD.
Options available: Enabled, Disabled. Default setting is Enabled.
Attempt to send freeze lock command to NVMe SSDs during boot.
Options available: Enabled, Disabled. Default setting is Enabled.
Options available: BIOS Build-In, NVMe Device, Disabled.
Default setting is BIOS Build-In.
Enable/Disable allow user control NVMe LED. It only available the
NVMe device direct connect to CPU.
Options available: Disable, Enable. Default setting is Disable.
BIOS Setup
- 63 -