Pci Subsystem Settings - Gigabyte R163-SG0-AAC1 User Manual

5-2-4 PCI Subsystem Settings

Parameter
PCI Bus Driver Version
SLOT# I/O ROM
(Note1)
SLOT# Lanes
(Note1)
SLOT# Max Link Speed
M2M I/O ROM
(Note2)
M2M Lanes
(Note2)
M2M Max Link Speed
(Note1) This section is dependent on the available PCIe Slot.
(Note2) This section is dependent on the available M.2 Slot.
Description
Displays the PCI Bus Driver version information.
When enabled, this setting will initialize the device expansion ROM
for the related PCI-E slot.
Options available: Enabled, Disabled. Default setting is Enabled.
Change the PCIe lanes. Default setting is Auto.
Configure PCIe max link speed.
Options available: Auto, Gen1, Gen2, Gen3, Gen4, Gen5.
(Note1)
Default setting is Auto.
Enable/Disable M2M devices, and initializes device expansion ROM.
Options available: Enabled, Disabled. Default setting is Enabled.
Change the M2M PCIe lanes.
Options available: Auto, x4, x2x2. Default setting is Auto.
Configure M2M max link speed.
(Note2) Options available: Auto, Gen1, Gen2, Gen3, Gen4, Gen5.
Default setting is Auto.
BIOS Setup
- 57 -