● Before detaching parts, make sure the motor has stopped completely, then disconnect the plug from the outlet.
● Clean the parts thoroughly after every use. Keep all parts clean and dry always.
● Do not use benzine, thinner, bleach, alcohol, nylon face of sponge, metal brushes or polish powder etc.
● Some discoloration of the plastic parts may occur upon usage. Even if the parts are washed with a sponge, the discoloration
can not be completely removed, but it does not affect usage. If you clean the parts as soon as possible after usage, it can be
removed relatively well.
● When cleaning the parts in a dishwasher, do not put heavy objects on top of the parts.
Food Pusher
Running Water
✔
Dishwasher
✔
Well-wrung
✔
Damp Cloth
Brush
✘
Scouring
✘
Pad
Soft Sponge
✔
Wash each part in cold or lukewarm water with a soft sponge.
Rinse and dry thoroughly before storing.
Note
Power Plug and Power Cord
1) Turn over the motor housing and wind the power cord
two turns as illustrated.
EN8
JZ50M168_MJ-CS100ML_20221005.indb 8
JZ50M168_MJ-CS100ML_20221005.indb 8
After Use
Cleaning
60 0
60 0
Container
Cup Cover
Juice Cup
Cover
✔
✔
✔
✔
✔
✔
✘
✘
✘
✘
✔
✔
Storing
2) Insert the power cord into the power cord clamp to fit
Pulp Container
Container
✔
✔
✔
✔
✔
✔
✘
✘
✘
✘
✔
✔
● Wash each
Wash
carefully
part in cold
with a
or lukewarm
brush under
water with a
running
soft sponge.
water.
Rinse and dry
thoroughly
before storing.
● When using a
dishwasher, do
not set the pulp
container side of
the part down in
the dishwasher.
(It may cause
deformation of
the part.)
the cord in position.
Spinner
Motor Housing
✔
✘
✘
✘
✘
✔
✔
✘
✘
✘
✘
✔
Wipe off any dirt
or stains with a
clean damp cloth.
2023-01-05 19:42:22
2023-01-05 19:42:22